742881
123
Zoom out
Zoom in
Previous page
1/182
Next page
116
Name
Description
network with better WiFi signal.
Preamble
It specifies a group of bits located at the beginning of a packet to enable a receiver
of the packet to perform synchronization and prepare for receiving data. By default,
the Long Preamble option is selected for compatibility with old network adapters
installed on wireless clients. To achieve better synchronization performance of
networks, you can select the Short Preamble option.
TD-MAX
TD-MAX is Tenda's proprietary Time Division Multiple Access (TDMA) polling
technology. It assigns time slots for each device communication to avoid the
“hidden node” problem, which occurs when a node is visible from a wireless AP, but
not from other nodes communicating with the originating AP.
TD-MAX improves overall performance in PointtoMultiPoint (PtMP) installations
and noisy environments, because it reduces latency, and offers better tolerance
against interference. Because of its advantages, TD-MAX also increases the
maximum possible number of users that can associate with an AP that uses
TD-MAX.
If TD-MAX is enabled, the device operates in TD-MAX mode and only accepts
connections from TD-MAX devices. And you cannot connect standard Wi-Fi devices,
such as laptops, tablets, or smart phones, to the CPE.
Signal Transmission
It specifies the wall penetrating capability of the device.
Coverage-oriented: With less interference nearby, this mode enables the device to
cover wider area.
Capacity-oriented: With strong interference nearby, this mode improves the
devices anti-interference capability.
TPC
The Transmit Power Control (TPC) function decreases the TX power of this device
automatically to improve the negotiation rate when the two devices are too close
By default, when the received signal strength is greater than -25 dBm, the device
decreases its TX power. The received signal strength can be checked on the Status >
Wireless Status page.
Signal Reception Level
It is used to adjust the signal reception level. A higher level leads to better signal
reception capability, but lower throughput. Adjust the level based on your actual
situation.
Transmission Distance
It specifies the wireless transmission distance of this device. You can set it based on
the actual installation distance.
Beacon Interval
It specifies the interval at which this device sends Beacon frames. Beacon frames
are sent at the interval to announce the existence of a wireless network. Generally,
a smaller interval allows wireless clients to connect to this device sooner, while a
larger interval allows the wireless network to transmit data quicker.
Fragment Threshold
It specifies the threshold of a fragment. The unit is byte. Fragmenting is a process
that divides a frame into several fragments, which are transmitted and
acknowledged separately. If the size of a frame exceeds this threshold, the frame is
fragmented. In case of a high error rate, you can reduce the threshold to enable this
123


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda O2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda O2 in the language / languages: English as an attachment in your email.

The manual is 6,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info