742881
87
Zoom out
Zoom in
Previous page
1/182
Next page
80
Parameters description
Name
Description
DHCP Server
It specifies whether to enable the DHCP server function of the device. By default, it
is disabled.
Start IP Address
It specifies the start IP address of the IP address pool of the DHCP server. The
default value is 192.168.2.100.
End IP Address
It specifies the end IP address of the IP address pool of the DHCP server. The
default value is 192.168.2.200.
The start and end IP addresses must belong to the same network segment as the IP address of
the LAN port of the device.
Subnet Mask
It specifies the subnet mask assigned by the DHCP server to clients. The default
value is 255.255.255.0.
Gateway Address
It specifies the default IP address gateway assigned by the DHCP server to clients.
Generally, it is the IP address of the LAN port of a router on the LAN. The default
value is 192.168.2.254.
A client can access a server or host not in the local network segment only through a gateway.
Primary DNS Server
It specifies the primary DNS server IP address assigned by the DHCP server to
clients. The default value is 8.8.8.8.
To enable clients to access the internet, set this parameter to a correct DNS server IP address or
DNS proxy IP address.
Secondary DNS Server
It specifies the secondary DNS server IP address assigned by the DHCP server to
clients. This parameter is optional.
Lease Time
It specifies the validity period of an IP address assigned by the DHCP server to a
client.
When half of the lease time has elapsed, the client sends a DHCP request to the
DHCP server to renew the lease time. If the request succeeds, the lease time is
extended according to the request. Otherwise, the client sends the request again
when 7/8 of the lease time has elapsed. If the request succeeds, the lease time is
extended according to the request. Otherwise, the client must request an IP
address from the DHCP server after the lease time expires.
It is recommended that you retain the default value.
87


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda O2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda O2 in the language / languages: English as an attachment in your email.

The manual is 6,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info