742874
114
Zoom out
Zoom in
Previous page
1/118
Next page
104
A.2 FAQ
Q1: I cannot access the web UI of the AP after entering 192.168.0.254. What should I do?
A1: Try the following solutions:
Ensure that all your Ethernet cables are properly connected.
If there is no Tenda AC or Tenda router with AP functionality in the network, ensure that the IP
address of your computer has been set to 192.168.0.X (X: 2 to 253), and the IP address is not
used by any other devices in the same network.
Clear the cache of your web browser, or replace the web browser.
Disable the firewall of your computer.
Replace your computer.
If two or more APs are connected in the network without an Tenda AC or Tenda router with AP
functionality, an IP address conflict may happen. You should leave only one AP in the network
first and set a new IP address 192.168.0.X (X: 2 to 253) for the AP. Then repeat this procedure to
modify the IP addresses of the other APs. Meanwhile, make sure that the IP address of your
computer is in the same network segment with your APs’ new IP addresses. Then try logging in
to the web UI of your APs using their new IP addresses.
If the AP has been managed by an Tenda AC or Tenda router with AP functionality, the AP’s IP
address may be no longer 192.168.0.254. In that case, go to the web UI of the AC/router to
view the new IP address of the AP, and then log in to the AP’s web UI using the new IP address.
If the problem persists, reset the AP, and then try logging in again.
Q2: My access controller (AC) cannot find my AP. What should I do?
A2: Try the following solutions:
Ensure that all the devices in the network are connected properly and the LED of the AP blinks.
If VLANs have been defined in your network, verify that the corresponding VLAN has been
added to your AP controller.
Reboot your AP.
Upgrade firmware your AP to the latest version.
Reset your AP.
114


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda i24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda i24 in the language / languages: English as an attachment in your email.

The manual is 9,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info