742874
107
Zoom out
Zoom in
Previous page
1/118
Next page
97
7.6 Uplink check
7.6.1 Overview
In AP mode, the AP connects to its upstream network using the LAN port. If a critical node between
the LAN port and the upstream network fails, the AP as well as the wireless devices connected to
the AP cannot access the upstream network. If uplink detection is enabled, the AP regularly pings
specified hosts through the LAN port. If all the hosts are not reachable, the AP stops its wireless
service and wireless devices cannot find the SSIDs of the AP. The device can reconnect to the AP
only after the connection between the AP and the upstream networks is recovered.
If the uplink of the AP with uplink check enabled is faulty, wireless devices can connect to the
upstream network through another nearby AP that works properly.
See the following topology (The LAN port serves as the uplink port).
7.6.2 Configuring uplink detection
To enter the configuration page, choose Tools > Uplink Detection first.
Procedure
Step 1 Enable Uplink Detection.
Step 2 Enter the LAN IP address of Host1 and Host2 to ping in the corresponding box.
Ethernet port
Internet
Router
PoE switch
AP
WAN
LAN
Devices
107


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda i24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda i24 in the language / languages: English as an attachment in your email.

The manual is 9,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info