742874
64
Zoom out
Zoom in
Previous page
1/118
Next page
54
Parameter
Description
Fragment Threshold
It specifies the threshold of a fragment. Unit: byte.
Fragmenting is a process that divides a frame into several fragments, which are
transmitted and acknowledged separately. If the size of a frame exceeds this threshold,
the frame is fragmented.
In an environment of high error rate, you can reduce the threshold to enable the AP to
resend only the fragments that have not been sent successfully, so as to increase the
frame throughput.
In an environment without interference, you can increase the threshold to reduce the
number of acknowledgement times, so as to increase the frame throughput.
RTS Threshold
It specifies the frame length threshold for triggering the RTS/CTS mechanism. Unit:
byte.
If a frame exceeds this threshold, the RTS/CTS mechanism is triggered to reduce
conflicts.
Set the RTS threshold based on the actual situation. An excessively small value
increases the RTS frame transmission frequency and bandwidth requirement. A higher
RTS frame transmission frequency enables a WiFi network to recover from conflicts
quicker. For a WiFi network with high user density, you can reduce this threshold for
reducing conflicts. The RTS mechanism requires some network bandwidth. Therefore, it
is triggered only when frames exceed this threshold.
Signal Transmission
Coverage-oriented: This mode broadens WiFi coverage of APs, and is usually used
in scenarios deployed with fewer APs, such as offices, warehouses, and hospitals.
Capacity-oriented: This mode effectively decreases mutual interference among
APs, and is usually used in scenarios deployed with massive APs, such as
conferences, exhibition halls, banquet halls, stadiums, classrooms of
higher-education institutes, airports and so on.
DTIM Interval
It specifies the interval for transmitting the Delivery Traffic Indication Message (DTIM)
frame. Unit: Beacon.
A countdown starts from this value. The AP transmits broadcast and multicast frames
in its cache only when the countdown reaches zero.
For example, if DTIM Interval is set to 1, the AP transmits all cached frames after each
beacon frame is transmitted.
RSSI Threshold
Set a minimum strength of received signals acceptable to the AP. If the strength of the
signals transmitted by a wireless device is weaker than this threshold, the wireless
device cannot connect to the AP.
If there are multiple APs, an appropriate RSSI Threshold ensures that wireless devices
can connect to the AP’ WiFi networks with strong signals.
Prioritize 5 GHz
If enabled, devices that support 5 GHz band choose to connect the AP’s 5 GHz WiFi
network first. Otherwise, they randomly connect to 2.4GHz or 5 GHz WiFi network. This
option is available on the 5 GHz configuration page.
The default RSSI threshold to enable this function is -80 dBm. You can adjust the
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda i24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda i24 in the language / languages: English as an attachment in your email.

The manual is 9,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info