742874
61
Zoom out
Zoom in
Previous page
1/118
Next page
51
Parameter
Description
region.
Network Mode
It specifies the wireless network mode (also called 802.11 mode, radio mode, or
wireless mode) of the AP. A proper network mode enables the clients to get the
maximum transfer rate and compatibility.
Available options for 2.4 GHz band: 11b, 11g, 11b/g, and 11b/g/n (default).
Available options for 5 GHz band: 11a, 11ac (default), and 11a/n mixed.
You are recommended to keep the default settings.
Channel
It specifies the operating channel of the AP. To configure this parameter, deselect Lock
Channel.
Auto indicates that this device automatically changes to a channel rarely used in the
ambient environment to prevent interference.
Channel Bandwidth
It specifies the wireless channel bandwidth of the AP.
Available options for 2.4 GHz band: 20MHz (default), 40MHz, and 20/40MHz.
Available options for 5 GHz band: 20MHz, 40MHz, and 80 MHz (default).
Extension Channel
It specifies the wireless extension channel of the AP.
Available only when Channel Bandwidth is set to 40MHz, and 20/40MHz on 2.4 GHz
band.
Lock Channel
If selected, Country/Region, Network Mode, and channel-related parameters
(including Channel Bandwidth and Extension Channel) become dim and cannot be
modified. By default, it is selected.
Transmit Power
Transmit power of this device.
A higher value leads to wider WiFi coverage. However, decreasing the value properly
increases performance and security of the wireless network.
To adjust it, deselect Lock Power first.
Lock Power
If selected, the Transmit Power cannot be adjusted. By default, it is selected.
Preamble
It specifies a group of bits located at the beginning of a packet, according to which the
receiver of the packet can perform synchronization and prepare for receiving data.
By default, the Long Preamble option is selected for compatibility with old network
adopters installed on wireless devices.
Short GI
Short guard interval for preventing data block interference.
Propagation delays may occur on the receiver side due to factors such as multipath
wireless signal transmission. If a data block is transmitted at an overly high speed, it
may interfere with the previous data block. The short GI helps prevent such
interference. Enabling the short GI can yield a 10% improvement in wireless data
throughput.
Suppress Broadcast
Probe Response
Whether or not to suppress the broadcast probe response.
If enabled, this device does not respond to the requests without an SSID, saving
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda i24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda i24 in the language / languages: English as an attachment in your email.

The manual is 9,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info