742874
37
Zoom out
Zoom in
Previous page
1/118
Next page
27
Parameter description
Parameter
Description
SSID
Select one SSID from the drop-down list menu.
The AP allows you to enable 8 SSIDs on 2.4 GHz band, and 4 SSIDs on 5 GHz band.
Enable
Used to enable or disable the wireless network you selected.
Broadcast SSID
Enable: Nearby wireless clients can detect the SSID.
Disable: Nearby wireless clients cannot detect the SSID, and you need to enter
the SSID manually on the wireless client to access the wireless network.
Isolate Client
This parameter implements a function similar to the VLAN function for wired networks.
It isolates the wireless devices connected to the same WiFi network, so that the
wireless devices can access only the wired network connected to the AP. You can apply
this function to hotspot setup in public spaces, such as hotels and airports to improve
network security.
WMF
The number of wireless devices keeps increasing currently, but wired and wireless
bandwidth resources are limited. Therefore, the multicast technology, which enables
single-point data transmission and multi-point data reception, has been widely used in
networks in order to reduce bandwidth requirements and prevent network congestion.
Nevertheless, if a large number of devices are connected to a wireless interface of a
WiFi network and multicast data is intended for only one of the devices, the data is still
sent to all the devices, which increases unnecessary wireless resource usage and may
lead to wireless channel congestion. In addition, multicast stream forwarding over an
802.11 network is not secure, either.
The WMF function of the AP converts multicast traffic into unicast traffic and forwards
the traffic to the multicast traffic destination in the WiFi network, helping save wireless
resources, ensuring reliable transmission, and reducing delays.
Suppress Broadcast
Probe Response
If enabled, this device does not respond to the requests without an SSID, saving
wireless resources.
Max. Number of
Clients
This parameter specifies the maximum number of devices that can connect to the WiFi
network corresponding to an SSID. If the number is reached, the WiFi network rejects
new connection requests from devices. This limit helps balance load among SSIDs.
The AP supports 128 clients at most. That is to say, clients connected to all the enabled
wireless networks of the AP cannot exceed 128. If you enable multiple SSIDs, plan your
maximum number of clients to each SSID first.
Chinese SSID
Encoding
It specifies the character encoding format.
Available options include GB2312 and UTF-8.
A proper encoding format lets the SSID containing Chinese characters be displayed
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda i24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda i24 in the language / languages: English as an attachment in your email.

The manual is 9,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info