742873
41
Zoom out
Zoom in
Previous page
1/84
Next page
Step 1 Select the SSID to be configured from the SSID drop-down list box.
Step 2 Select the Enable check box to enable the selected SSID.
Step 3 Set Client limit to the maximum number of wireless clients that can be connected to the AP using the
selected SSID.
Step 4 Change the value of the SSID text box to a required wireless network name.
Step 5 (Skip this step if your SSID does not include Chinese characters.) Set Chinese SSID Encode to an
encoding format of the Chinese characters in your SSID.
Step 6 Select a security mode from the Security Mode drop-down list box for your SSID. For the detailed
security mode configuration procedure, refer to Security Mode.
Step 7 Click Save.
---End
Parameter description
Parameter
Description
SSID
It specifies the SSID to be configured.
The AP allows 4 SSIDs. The default SSID is the primary SSID of the AP, which is
Tenda_XXXXXX, where XXXXXX indicates the last 6 characters in the MAC address
specified on the label on the external surface of the AP.
Enable
It specifies whether to enable the selected SSID.
By default, the primary SSID is enabled and the other SSIDs are disabled. You can
enable them as required.
Broadcast SSID
It specifies whether to broadcast the selected SSID.
Enable: It indicates that the AP broadcasts the SSID and the SSID can be detected by
clients.
Disable: It indicates that the AP does not broadcast the SSID and the SSID cannot be
detected by clients. If a user wants to connect to the wireless network corresponding
to this SSID, the user must enter the SSID manually.
This AP can automatically hide its SSID. When the number of clients connected to
the AP with an SSID of the AP reaches the upper limit, the AP stops broadcasting
the SSID.
AP isolation
It specifies whether to isolate the wireless clients connected to the AP with the
selected SSID.
Enable: It indicates that the wireless clients connected to the AP with the selected
SSID cannot communicate with each other. This improves wireless network security.
Disable: It indicates that the wireless clients connected to the AP with the selected
SSID can communicate with each other.
WMF
It specifies whether to forward multicast packets through unicast tunnels. Generally,
multicast packets are usually transmitted at the lowest rate, such as 1 Mbps, leading to
poor transmission efficiency. WMF leverages the high auto-negotiated rate, reliable
feedback mechanism, and other advantages of unicast packets to address multicast
problems such as video playback stalls caused by packet loss and long delays over a
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda i12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda i12 in the language / languages: English as an attachment in your email.

The manual is 3,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info