742870
13
Zoom out
Zoom in
Previous page
1/160
Next page
Device Installation
- 7 -
2.1 Installation Notes
Follow the following notes to avoid device damage or personal injury due to improper use.
2.1.1 Safety Measures
It is necessary to wear antistatic gloves in the installation process and the device must not be powered on.
Use the power cord in the product packaging box for power supply to the device.
Ensure that any input voltage range is consistent with the input voltage range indicated on the device.
Ensure that the installation location of the device is well ventilated.
Do not open or remove the device shell.
Do not cut off the power supply when cleaning the device. Do not use any liquid to scrub the device.
Keep the device away from power lines, electric lamps, power grids or any places where there is a potential
risk of touching a strong-current power grid.
Note
A tamper protection seal is attached to one installation screw on the device shell. When maintaining the device,
an agent must keep its seal intact. If you want to open the device shell, contact your local agent. Otherwise, you
are held liable provided that the device cannot be maintained due to unauthorized action.
2.1.2 Environmental Requirements
Temperature and humidity requirements
Environment description
Temperature
Humidity
Operating environment
0 ~ 40
10% - 90% RH (non-condensing)
Storage environment
-40 ~ 70
5% - 90% RH (non-condensing)
Cleanliness requirement
To avoid any electrostatic effect on normal action of the device, pay attention to the following: Keep room air
clean and regularly remove dust on the device. Perform correctly grounding of the device to ensure that static
electricity is transferred smoothly.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda G3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda G3 in the language / languages: English as an attachment in your email.

The manual is 5,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info