742855
175
Zoom out
Zoom in
Previous page
1/186
Next page
Wireless AC1200 ADSL2+ Dual Band Modem Router
171
Appendix 3 FAQs
1. I cannot access the device's management interface. What should I do?
1) Verify the physical connection (namely, the Ethernet cable) between your PC and the device. For details, see
Chapter 2 Hardware Install hereof.
2) Double check the TCP/IP settings on your PC. For details, see Appendix 1 Configure Your PC hereof.
3) Press the RST/WPS button on the device and then re-access the management interface.
4) Change the Ethernet cable that connects your PC and the device.
5) Try accessing device management interface from other PCs, smart phones or iPads.
6) Connect your PC alone to one of the LAN ports on the device.
2. I forget the wireless security key. What should I do? (How do I configure or change the security key?)
Try the default security key, which can be seen from the label attached to the device bottom.
If the above works, access the device web manager and customize a new security key.
If the above does not work, press the RST/WPS button on the device to restore factory default settings. And then
log in to the device web manager to customize a new security key.
3. My notebook is unable to search wireless networks, what should I do?
1) Verify that wireless service is enabled on your notebook by checking the wireless hardware or software button on
your notebook. The hardware button is usually located on the side of your notebook. Note that some notebooks
may not have such hardware button. Software button can be implemented by pressing Fn+ . Fn is situated on
the bottom left corner of your keyboard, may be any key between F1-F12 depending on what type of
keyboard you are using.
2) Log in to the device, select Wireless > 2.4G/5G > Basic and change the wireless network name (SSID). Then
search again.
Follow below steps to verify that wireless service is enabled on your notebook (for Windows XP OS only).
From the desktop, right click on the My Computer icon and select Manage. Select Services and Applications, double
click Services and view the status of Wireless Zero Configuration. If Status dose not display Started, right click the
Wireless Zero Configuration and select Start; if Startup Type displays Disabled, right click the Wireless Zero
Configuration, select Properties; from the Startup Type drop-down list box, select Automatic and then click Start in
Service Status.
4. Why cannot I connect to the searched wireless network?
1) Verify that you entered a correct security key.
175


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda D1201 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda D1201 in the language / languages: English as an attachment in your email.

The manual is 8,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info