742848
124
Zoom out
Zoom in
Previous page
1/141
Next page
116
Name
Description
device.
All: It indicates that any computer in WAN can manage this device remotely. Select
this option only when necessary.
Manual: It indicates that only the device with specified IP address can manage this
device remotely. If this device belongs to a LAN, the gateway address (a public IP
address) of the device should be entered.
Port
It specifies the port number used for remote management of device. Default: 8080.
You can change it if necessary.
Ports 1 to 1024 have been used by well-known services. To avoid port conflicts, you
can set the port number to one between 1025 and 65535. Then you can access the
device from WAN by visiting an address in the form of http://WAN IP address:port
number. If the DDNS function is enabled on the device, you can access the device by
visiting an address in the form of http://Domain name of WAN port:port number.
Example of configuring remote web management
The device is used to bridge to the ISP hotspot for internet access in a house in the countryside, and
the device is set to WISP mode.
Networking requirement
The host needs to troubleshoot the network when he is on business. So he needs to access the
devices web UI on WAN.
You are recommended to use the remote web management function to meet the requirement.
Assume that:
The WAN IP address of the device is 202.105.106.55
The IP address of the computer which is allowed to access the device on WAN is
202.105.88.77
Port number is 8080
Network topology
Configuration procedure
Step 1 Log in to the web UI of the device, and choose Advanced > Network Service.
Step 2 Enable the Remote Web Management function.
IP Address: 202.105.88.77
ISP hotspot
WISP mode
WAN IP: 202.105.106.55
124


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda AP4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda AP4 in the language / languages: English as an attachment in your email.

The manual is 3,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info