742848
69
Zoom out
Zoom in
Previous page
1/141
Next page
61
Parameters description
Name
Description
MAC Address
It specifies the MAC address of LAN port.
IP Address Type
It specifies the type of obtaining an IP address. The default is Static IP Address.
Static IP Address: Specify the IP address and subnet mask manually.
DHCP (Dynamic IP Address): The device obtains an IP address and subnet mask
from the upstream DHCP server in the network.
If the IP Address Type is set to DHCP (Dynamic IP Address), you need to check the
devices IP address on the clients list of the DHCP server of the upstream device, and
use this IP address to log in.
IP Address
It specifies the LAN IP address of the device. The default is 192.168.0.254.
Subnet Mask
It specifies the subnet mask corresponding to the LAN IP address of the device. The
default is 255.255.255.0.
5.1.2 Setting an LAN IP address manually
This method applies to a small LAN network with a few APs. With this method, you need manually
set the IP address, subnet mask, gateway IP address, and DNS server IP addresses of the device.
Therefore, this mode is recommended if you need to deploy only a few devices.
Configuration procedure:
Step 1 Choose Network > LAN Setup to enter the configuration page.
Step 2 Select Static IP Address from the IP Address Type drop-down list.
Step 3 Set IP Address, Subnet Mask, Default Gateway, and Primary DNS Server.
Step 4 Customize a device name as required.
Step 5 Click Save.
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda AP4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda AP4 in the language / languages: English as an attachment in your email.

The manual is 3,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info