688788
14
Zoom out
Zoom in
Previous page
1/20
Next page
INNOVA 1000
INNOVA 1000
Gebruiksaanwijzing
Gebruiksaanwijzing
© Test Equipment Nederland BV GASTESTERS
Version [# 004] Date 26 maart 2008
T
EST
E
QUIPMENT
N
EDERLAND
BV
13
5.4
B
EDRIJFSSTORINGEN
Als tijdens het aanschakelen van de tester geen functie meer
wordt waargenomen, kan het zijn dat er een zekering kapot
is. Schakel het apparaat uit en koppel het netsnoer los. Wip
vervolgens met een kleine schroevedraaier de zekeringhou-
der naast de aan/uit schakelaar (15) open en controleer de
zekeringen. Plaats nu, indien benodigd, de nieuwe zekering-
en in het klepje van de houder, en druk het klepje weer dicht.
Als na het aanschakelen van het apparaat wederom de
zekering kapot gaat, neem dan contact op met de service
dienst van uw leverancier.
Tijdens het opstarten kan het gebeuren dat de tester in de
zelftest een fout constateert. Het kan gebeuren dat de tester
van buiten af beïnvloed wordt of dat er daadwerkelijk een fout
is opgetreden. Voer nu het volgende uit:
- Schakel de tester uit en wacht minimaal 30 seconden.
Schakel vervolgens weer de tester aan. Indien de fout-
melding is verdwenen kunt U meten.
- Indien de foutmelding wederom getoond wordt, kunt U
bovengenoemde stap nogmaals herhalen. Blijft de fout
optreden, neemt U dan contact op met de servicedienst
van uw leverancier.
6
V
OERTUIGEN ZONDER
K
ATALYSATOR
6.1
B
EDIENING
Selecteer de standaard meting in het menu, sluit alle signaal-
opnemers aan op de motor, start de motor en breng, indien
benodigd, de motor op bedrijfstemperatuur.
De motorolie temperatuur moet minimaal 70 graden Celsius
bedragen.
ALLE AFREGELINGEN MOETEN MET EEN WARME
MOTOR UITGEVOERD WORDEN
Motor op voorgeschreven stationair toerental brengen, CO,
CO , O en HC binnen de door de fabrikant voorgeschreven-
22
en CO tevens binnen de wettelijk- toegestane waarde
afstellen.
Voor het uitvoeren van de uitlaatgastest is het noodzakelijk
eerst de correcte werking van enige systeemdelen te contro-
leren.
- Is het ontstekingssysteem in orde.
- Is het luchtfilter schoon.
- Is het in- en uitlaatcircuit gasdicht.
- Is de motorolie niet overmatig vervuild.
Zijn deze voorwaarden in orde bevonden, dan leveren de
gemeten waarden een betrouwbare indruk van de motortoe-
stand.
ZUURSTOF:
Op het scherm verschijnt in % vol een over-
schot aan zuurstof. Is het zuurstofoverschot in het uitlaatgas
aan het einde van het uitlaatsysteem abnormaal hoog, dan
wordt dit meestal veroorzaakt door een lekkage van omge-
vingslucht.
Buitenlucht samenstelling:
O ...............± 21% vol
2
N ...............± 79% vol
2
Zoals te zien is bevat normale omgevingslucht ca. 20,9% vol
zuurstof. Voer bij twijfel een lektest uit om de dichtheid van
het meetsysteem te controleren.
Aan de hand van de gemeten gaswaarden CO, CO , O , CO
22
gecorrigeerd en HC kan de mengselsamenstelling afgeregeld
worden, raadpleeg hiervoor de theoretische grafiek met per
gas de kromme afgebeeld.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ten Innova 1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ten Innova 1000 in the language / languages: Dutch as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info