Manual Temptech PREMIUM SERIES (page 20 of 35) (English)

785928

Zoom out

Zoom in

1/35

.17.

INSTRUCTION MANUAL

For Single Zone

Function

Indicator

Function

Indicator 1

o The Indicator 1 will ash every 2 seconds when

the unit is plugged in;

o The Indicator 1 will stay on when the compressor

starts to work;

o The Indicator 2 will ash every 3 seconds when

the heating function of lower zone starts to work;

o The Indicator 2 will stay on when the cooling

function of lower zone starts to work.

CARE AND MAINTENANCE

CLEANING THE WINE COOLER

• Clean regularly surfaces of the wine coolerto avoid contamination of wines.

• Turn off the power, unplug the appliance, and remove all items including shelves.

• Wipe the inside surfaces with a sponge and baking soda solution. The solution should

be about 2 tablespoons of baking soda to 1 quart (approx. 1 litre) of warm water.

• Wash the shelves with a mild detergent solution. Allow wooden shelves to dry before

placing back into the wine cooler.

• Wring excess water out of the sponge or cloth when cleaning area of the controls, or

any electrical parts.

• Wipe the outside cabinet with warm water and mild liquid detergent. Wipe dry with

a clean soft cloth.

• Do not use steel wool or steel brush on the stainless steel. These will scratch the

stainless steel with steel particles and rusting may occur.

REMOVING THE SHELVES

• Before removing a Shelf from the appliance, it is necessary to remove all the bottles

on the Shelf ;

• For a model without Telescopic Rail, move the shelf to the position where the cut

of the wooden shelf is directly under the plastic stopper and lift the wooden shelf.

Please ensure these are replaced when the shelf is put back.

• Make sure the shelves are fully engaged before loading any bottle into the cabinet.

Pull the shelves out all the way to the STOPPER position and push them back in

several times to make sure the shelves are properly engaged.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Temptech PREMIUM SERIES in the language / languages: English as an attachment in your email.

The manual is 8.08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Temptech PREMIUM SERIES Manual

Product: