773990
6
Zoom out
Zoom in
Previous page
1/24
Next page
6. ice making machine should not be installed in the
environment without sewer and water seepage, and it is
strictly prohibited from high temperature equipment.
7. air-cooled ice making machines (such as refrigerators, ovens, etc.) rely on
air circulation to dissipate heat. So it is necessary to keep the space above
15cm to benefit the heat dissipation.
-4-
Installation of Water Supply
1.The ice maker must use drinkable normal atmospheric temperature
filtered water.
2.Water pressure of water supply must be controlled between
0.3~0.5MPa, if over pressure pressure reducing valve need to be
installed.Don’t make the water inlet hose be squeezed.
3.The two ends of the water inlet hose are 3 / 4 " internal thread
( 20mm ) and 1 / 2 " internal thread ( 15mm ) joints with silicone seal
washers, so no need to wind tape.
4. The water filter is equipped with a filter element, unscrewing it with a
filter wrench before using the water filter. Take out the filter element,
tearing up the packaging film of filter element, putting it back as it used
to be and screwing up it. Changing the filter element every half year in
the process of use.
5.Please notice that the filter cover has the water inlet and the water
outlet direction marks.
6.Connecting the joint of 3/4 "with the water inlet of the machine(white
3/4" outer thread), and connect the joint of 1/2 "with water supply pipe.
7.Water-cooled ice maker, added one inlet and one outlet joints of
3/4” external thread pipe, the black color distinguishes them from the
water intake of making ice.
8. The ice maker is drained by gravity. Therefore, it is necessary to
ensure that the drainage pipe has sufficient slope and drop.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Temptech ICEQ55Z at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Temptech ICEQ55Z in the language / languages: English as an attachment in your email.

The manual is 5.86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info