785926
27
Zoom out
Zoom in
Previous page
1/54
Next page

INSTRUCTION MANUAL
UNLOCKING THE CONTROL PANEL
To unlock the control panel, touch the power mark and lighting mark
with 2 ngers at the same time and hold for 3 seconds . When unlocked a buzz sound
will be heard.
The control panel will be automatically locked with a buzz sound heard after 10
seconds without being touched.
Under the locked condition, the control panel will not react to any touching order for
Lighting On/O and Temperature Setting.
INTERIOR LIGHTING ON/OFF CONTROL
Under the unlocked condition, touch the lighting mark to turn on (or turn o) the
interior cool LED lighting.
The lighting will stay on unstil it is manually turned o.
TEMPERATURE DISPLAY WINDOW
The temperature is displayed in digital which is the best way to be read out. The
digital is shown as the set temperature when you are setting the temperature.
When the temperature probe is out of order, the display window will show with HH
or “LL instead of a digital gure while continuous buzz sound will be heard. In case
of this happens, this appliance is considerately designed to keep periodical running
of compressor and fans which helps to keep the coldness of the inside cabinet to
protect your stored wines.
Warning: To avoid destroying your stored wines, it is strongly recommended
to have the appliance repaired immediately, as the spare periodical running
can not ensure the appliance to achieve the temperature you have set.
TEMPERATURE SETTING
For Single Zone
The default temperature setting range is : 5-20 ºC (41-68 ºF).
Directly touch the or mark to set the wine cooler temperature as you want.
The rst touch on or mark will recall the previous set temperature displayed.
Touch the mark to increase the set temperature by 1ºC (or by 1ºF). On the
contrary, touch the mark to decrease the set temperature by 1ºC (or by 1ºF).
For Dual Zone
The default temperature setting ranges are : 5-12 ºC (41-54 ºF) for the upper zone
and 12-20 ºC (54-68 ºF) for the bottom zone.
You need to select the set zone by touching the mark before touching the mark
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Temptech ELEGANCE SERIES at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Temptech ELEGANCE SERIES in the language / languages: English as an attachment in your email.

The manual is 11.55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info