Manual Telwin PRO START 2012 (page 3 of 68) (All languages)

649704

Zoom out

Zoom in

1/68

____________________(EN)____________________

INSTRUCTION HANDBOOK

GENERAL INFORMATION

A real, portable, battery-powered starter. Ideal for anyone

needing a starter. Its applications include boats, cars,

trucks, power generators, and much more.

Fully compatible with any 12 volt starter system.

The starter uses SEALED MAINTENANCE-FREE

BATTERIES, which means that the unit can be installed

in any position, in any location, without the fear of any

acid leaks.

The starter is also equipped with a switch that must be

activated on purpose to allow starting.

The starter can easily be placed under or behind a seat or

kept within arm’s reach.

Keep this manual.

The manual should be read, paying attention to all the

warnings and safety precautions to be taken when using

and maintaining the device, the list of components and all

technical specications.

Please keep this manual in a secure and dry place for

future reference.

PLEASE READ ALL THE INSTRUCTIONS BEFORE

USING THE STARTER!

WARNINGSANDSAFETYPRECAUTIONS

Warning:inordertoreducetheriskofpersonalinjury

and damage to equipment, it is highly recommended

to comply with all essential safety measures and

precautions when using the starter.

Protect the eyes. Always wear protective

goggles when using acid lead accumulators.

Avoid contact with battery acid. If an operator

should be sprayed or come into contact with

the acid, rinse the relative parts immediately

under clean running water. Continue to rinse the

area until the physician arrives.

It is important to connect the cables with the

poles in the right direction:

First connect the red clamp to the positive

terminal on the vehicle battery (+ symbol).

Connect the black clamp to the machine chassis, at

a distance from the vehicle battery and the fuel pipe.

- Use the starter in well ventilated areas. Do not

attempt to use the starter when there are gas or

inammable liquids in the vicinity.

- Make sure that the black and red clamps never

come into contact with each other as this could

cause them to fuse together or with other metal

objects. Return the clamps to their respective

housing.

4- FOR 12 VOLT SYSTEMS ONLY! This device is

destined for use on boats and vehicles running on

12 Volt electrical systems only.

5- USE ONLY IN EMERGENCIES: do not use the

starter instead of the vehicle battery. Use it during

start-up operations only.

6- Do not work alone. If there is an accident, the

assistant can be of assistance to the operator.

Prevent electrical shocks. Be very cautious

when applying the clamps to non-insulated

conductors or bus bars. Avoid all body

contact with surfaces of tubes, radiators, and metal

power substations whilst testing the voltage.

8- Keep the work area clean at all times. Untidy

cumbersome areas can lead to injuries.

9- Protect the starter appropriately from all possible

damage. It must only be used as indicated in this

Instruction Manual.

10- Ensure compliance with the indications in the work

area. Do not use in humid or wet facilities. Never

leave it out in the rain. Always work in well lit areas.

11- Do not expose to direct sunlight, heat sources or

humidity.

12-

Keepoutofchildren’sreach:theymust

never be allowed to access work areas or

handle any machines, instructions or

extensions.

13- When the starter is not being operated, it must be

stored in a dry area to prevent rust from forming.

always store the starter under lock and key and keep

out of reach of children.

14-

Always wear suitable clothing.

Never wear baggy clothing or

jewellerythat cangetcaught up

in moving parts. During all operations,

electrically insulated protection clothing and

non-slip boots must be worn at all times. Persons

with long hair must tie it back and wear a hair net.

15- Only experts are allowed to do repair work on the

machine as it involves signicant risk levels for

inexperienced workers.

16- Replacing parts and accessories. When performing

maintenance operations, replace with identical spare

parts only. Use of non-original spare parts invalidates

all warranties.

17- Make sure that the device is always positioned in a

stable and well supported manner. Never climb over

cables or electrical structures.

18- Careful attention must be paid when maintaining the

starter. Check the condition of cables on a regular

basis and if any damage is detected, have the same

repaired by an authorised technician.

19- Check there are no damaged parts. Before using

this starter, carefully check that all seemingly

damaged parts and assess whether or not they

can operate correctly. Check that the cables are

securely fastened to the starter. Remember that only

qualied technicians are allowed to repair or replace

damaged parts. Never use the starter if any of the

switches malfunction when turned to the ON /OFF

positions.

OPERATING PROCEDURES

WARNING:Electricshocksmaycause

injury or death. Do not touch bare

electrical conductors.

The starter is designed for use on vehicles or boats. It

does not need another vehicle or a 230VAC power supply

socket.

This starter can also be used as a portable 12V DC power

supply for remote areas or in emergencies.

The USB port can also be used to supply 5V DC to

devices that require less than 500mA.

Howtousethestarter:

ATTENTION: follow these instructions

meticulously, and always in the order given

below!

- Make sure that the vehicle or boat to be started is

switched off (switch or ignition key in the OFF position).

- First connect the red clamp (+) to the positive terminal

on the vehicle battery.

- Then connect the black clamp (-) to a non-movable

metal part of the engine; do not connect the clamp to

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Telwin PRO START 2012 in the language / languages: All languages as an attachment in your email.

The manual is 1,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Telwin PRO START 2012 Manual

Product: