649682
125
Zoom out
Zoom in
Previous page
1/164
Next page
- 125 -
INVERSIÓN POLARIDAD
SELECCIÓN TENSIÓN INCORRECTA
24V
5. INSTALACIÓN
5.1UBICACIÓNDELCARGADORDEBATERÍAS
- Durante el funcionamiento posicionar el cargador
de baterías de forma estable.
- Evitar levantar el cargador de baterías a través
del cable de alimentación o a través del cable de
carga.
5.2 CONEXIÓN A LA RED
- El cargado de baterías tiene que conectarse
exclusivamente a un sistema de alimentación con
un conductor de neutro conectado a tierra.
Controlar que la tensión eléctrica de red
sea equivalente a la tensión eléctrica de
funcionamiento.
- La línea de alimentación tendrá que equiparse
con sistemas de protección, como fusibles o
interruptores automáticos, sucientes para
soportar la absorción máxima del equipo.
- La conexión a la red tiene que realizarse con un
cable correspondiente.
- Las posibles extensiones del cable de alimentación
tienen que tener una sección adecuada y, de
cualquier forma, nunca inferior al del cable que se
entrega.
6. PROTECCIONES DEL CARGADOR DE
BATERÍAS
El cargador de baterías se autoprotege en caso de:
- Sobrecarga (suministro excesivo de corriente
hacia la batería).
- Cortocircuito (pinzas de carga puestas en
contacto entre ellas).
- Inversión de polaridad en los bornes de la batería.
- El aparato se protege contra sobrecargas,
cortocircuitos e inversión de polaridad mediante
protecciones electrónicas internas.
- El aparato, con pinzas libres, nunca tiene la
salida alimentada eléctricamente, excepto en la
modalidad SUPPLY.
7.CONSEJOSÚTILES
- Limpiar los bornes positivo y negativo de las
posibles incrustaciones de óxido, con el n de
asegurar un buen contacto de las pinzas.
- Si la batería con que se desea usar este cargador
de batería se instala de forma permanente en
un vehículo, también consultar el manual de
instrucciones y/o de mantenimiento del vehículo
en el párrafo “INSTALACIÓN ELÉCTRICA” o
“MANTENIMIENTO”. Preferiblemente desconectar,
antes de proceder a la carga, el cable positivo que
pertenece a la instalación eléctrica del vehículo.
125


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Telwin DOCTOR CHARGE 50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Telwin DOCTOR CHARGE 50 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 9,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info