649682

Telwin DOCTOR CHARGE 50 Manual

55
Zoom out
Zoom in
Previous page
1/164
Next page
- 55 -
LCD DISPLAY MODEL FUNCTIONS
- PULSE TRONIC CHARGING/MAINTENANCE
AUTOMATIC
CHARGE
- TEST
- BATTERY CHARGE STATUS
- BATTERY STARTING CAPACITY
- ALTERNATOR FUNCTIONING
TEST
- BATTERY MAINTENANCE
- EQUALIZATION
- DESULFATION
RECOVERY
- PRECISION POWER UNIT
- DIAGNOSTIC
- SUPPLY
POWER SUPPLY
- STARTER AID (if present)
START AID
KEY PAD MODEL FUNCTIONS
- PULSE TRONIC CHARGING/MAINTENANCE
AUTOMATIC
CHARGE
- BATTERY MAINTENANCE
- DESULFATION
RECOVERY
- STARTER AID (if present)
START AID
ON/OFF PROCEDURE
It switches ON automatically when the plug is
connected to the mains power socket, it will display
a series of information on the software version in
use and the set length of the cables. It switches OFF
when the plug is removed from the mains socket
and the battery charger cables are disconnected.
If the plug is removed from the mains socket and
the charger cables are connected to the battery, the
display (for LCD DISPLAY models) or charge status
LED (KEY PAD models) will remain ON if there is a
minimum voltage of 5V.
CABLE CONNECTION
POWER ON POWER OFF
230V - 1ph
50/60 Hz
230V - 1ph
50/60 Hz
MINIMUM BATTERY VOLTAGE
Thanks to the LIMIT CURRENT CHARGE LCC
function, it is possible to charge very low batteries
at a minimum of 2V (“LCC” DISPLAY).
Battery voltage below 2V are indicated on the LCD
display model by a message - “AL1” on (g A.2),
and on the KEY-PAD model by a yellow LED (g.
B.3).
SETTINGS MEMORY WITH NO NETWORK
VOLTAGE
If there is no network voltage available, if the clamps
are connected to the battery, the device stores the
most recent settings in its memory (the battery still
requires a minimum voltage of 5V).
SELECTION/SETTINGS
The settings are selected using these buttons (g.
A.21, 22, 23) for the LCD DISPLAY models or this
button (g. B.1) for the KEY PAD models, along with
a audible signal (the signal is prolonged for access
to the menu or advanced settings).
… 55 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Telwin DOCTOR CHARGE 50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Telwin DOCTOR CHARGE 50 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 9,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info