Manual Teltonika RUT905 (page 14 of 180) (English)

681331

Zoom out

Zoom in

1/180

5. Select Internet Protocol Version 4 (TCP/IPv4) and then click

Properties

6. By default the router is going to have DHCP enabled,

which means that if you select “Obtain an IP address

automatically” and “Obtain DNS server address

automatically”, the router should lease you an IP and you

should be ready to login.

7. If you choose to configure manually here’s what you do:

First select an IP address. Due to the stock settings that your router has arrived in you can only enter an IP in the

form of 192.168.1.XXX , where XXX is a number in the range of 2-254 (192.168.1.2 , 192.168.1.254 , 192.168.1.155 and

so on… are valid; 192.168.1.0 , 192.168.1.1 , 192.168.1.255 , 192.168.1.699 and so on… are not). Next we enter the

subnet mask: this has to be “255.255.255.0”. Then we enter the default gateway: this has to be “192.168.1.1”. Finally we

enter primary and secondary DNS server IPs. One will suffice, though it is good to have a secondary one as well as it will

act as a backup if the first should fail. The DNS can be your routers IP (192.168.1.1), but it can also be some external DNS

server (like the one Google provides: 8.8.8.8).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Teltonika RUT905 in the language / languages: English as an attachment in your email.

The manual is 8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Teltonika RUT905 Manual

Product: