634961
29
Zoom out
Zoom in
Previous page
1/52
Next page
Motorantenne
Wenn Ihre Satellitenanlage mit einer Motorantenne gesteuert
wird und Sie in der Antennenkonfiguration „Motorantenne“ aus-
gewählt haben, müssen folgende Einstellungen vorgenommen
werden:
LNB Typ
In diesem Punkt können Sie mit Hilfe der Pfeiltasten rechts/
links den LNB Typ auswählen, mit dem die Satellitenantenne
ausgerüstet ist.
7322 Motor Typ
In diesem Menüpunkt können Sie mit Hilfe der Pfeiltasten
links/rechts den Motortyp entsprechend Ihrer drehbaren
Satellitenanlage wählen.
Das Gerät unterstützt Funktionen für die DiSEqC 1.2 Steuerung
sowie für das USALS Protokoll. DiSEqC (Digital Satellite
Equipment Control) ist ein digitales Steuersignal zum Steuern
DiSEqC-tauglicher Komponenten wie Multischalter oder
Antennenmotoren über die Antennenleitung. Bei der DiSEqC
1.2 Steuerung werden alle Speicherungen im Motorspeicher
vorgenommen. Hierfür ist eine manuelle Suche jedes einzelnen
Satelliten nötig.
Achtung!
Haben Sie die Einstellung „DiSEqC 1.2“ (Betrieb des Digital-
Receivers an einer Drehanlage mit einem DiSEqC 1.2-Motor)
gewählt, müssen Sie als nächstes die Ost- und Westgrenzen
setzen. Dadurch werden mechanische Zerstörungen des
Spiegels durch Hindernisse vermieden. Sollten sich Hindernisse
(Schornstein, Wand etc.) im Drehbereich des Spiegels befinden,
muss dies bei der Einstellung der Ost-West-Grenzen unbedingt
beachtet werden. Befindet sich kein Hindernis im Drehbereich
des Spiegels, dann legen Sie die Grenzen so fest, dass sich der
Spiegel ein wenig über den jeweils äußersten zu empfangenden
Satelliten hinwegdrehen läßt.
Ost-West-Grenzen setzen
> 1. Wechseln Sie mit den Pfeiltastenauf/ab in die Zeile
„Ost-West Grenzen“ und bestätigen Sie mit der Taste
OK.
> 2. Wählen Sie in der oberen Zeile mit Hilfe der Pfeil-
tasten rechts/links die „Westgrenze“ aus.
> 3. Wechseln Sie in die mittlere Zeile und fahren Sie mit
den Pfeiltasten rechts/links den Motor an die westli-
che Grenzposition.
> 4. Wechseln Sie zurück in die obere Zeile und wählen
Sie die „Ostgrenze“ aus.
29
BDA TELE SR 27 06_09.indd 29 02.07.2009 16:47:04 Uhr
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Telestar SR 27 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Telestar SR 27 in the language / languages: German as an attachment in your email.

The manual is 12,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info