634929
68
Zoom out
Zoom in
Previous page
1/80
Next page
68
Reference transponder
Select a tranponder from the database or select none and enter the transponder parameters manually.
Frequency
Use this option to set the frequency of the transponder to search.
Reference transponder - Select a transponder from the satellite database or select ‘none’ to enter transponder
parameters manually.
Polarity
Use this option to set the polarisation of the signal between horizontal,
vertical, right and left circular.
Symbol rate
Use this option to set the symbol rate for the signal.
FEC
Use this option to set the FEC (Forward Error Correction).
PIDs
Use this option to set the PIDs between automatic and manual. If you choose manual, you can set the individual
Audio and Video PIDs and the PCR.
Video PID
Use this option to manually set the Video PID.
Audio PID
Use this option to manually set the Audio PID.
PCR PID
Use this option to manually set the PCR PID.
Channels
• Select All to search for all Free-to-Air and encrypted channels.
• Select Free-to-air to search only for Free-to-air channels.
DVB-S2
Define whether searching shall cover DVB-S2 transponders as well.
Finding and storing the channels
Once the options are set, press the “Green” key on the remote control to start the channel search. Once a channel
search is started, a progress bar and list of channels found will be displayed. At any time, you may stop the search
by pressing Exit on the remote control. After the channel search is complete, press the “Green” function key on
the remote control to save the channel list and exit.
FACTORY SETTINGS
Use this option to reset the receiver to default settings. This may be necessary when a large number of settings
have accidentally been made incorrectly, for example.
Access to factory defaults is protected by a PIN code (‘0000’ by default).
Factory Defaults
Press the “OK” key and confirm with the “Green” function key, if you want to reset the unit to the “Factory default”
settings.
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Telestar S 410i HD plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Telestar S 410i HD plus in the language / languages: German as an attachment in your email.

The manual is 6,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info