680417

Telekom Speedport W 100 Stick Manual

15
Zoom out
Zoom in
Previous page
1/26
Next page
5
08.12.2006 KA_GB_154_stick.fm
Security
Click the Sicherheit (Security) tab in the Einstellungen
(Settings) register card.
On this tab you can find all the possible settings which
ensure security for your PC when operating in the
WLAN.
When the device leaves the works the encryption is
deactivated. You are not normally able to communica-
te in the WLAN because the access points or the rou-
ter in the radio network protect against unauthorized
access, in particular by means of encryption.
Your Speedport W 100 Stick therefore has to be set
up in accordance with the security settings of the ac-
cess point/router.
You can find out what these settings are from the ad-
ministrator of the network you would like to access.
Verschlüsselung (Encryption)
Click the opening arrow beside the Verschlüsselung (Encryption) field. A list of the methods which are avai-
lable to you will then appear. You can gain access to networks which use one of these security methods.
You have the following possibilities:
The type of encryption and the code generated with it must be the same for all computers
within the network. Otherwise they will not be able to communicate with one another, even if
WPA or 802.1x is specified by the access point/router.
When you purchase the device, the encryption is set to Aus (OFF) and none of the entry fields are active. For
this reason, you cannot usually gain immediate access to an existing, configured network. If communication
cannot be established, the T-COM WLAN Manager symbol in the system tray is red.
If WEP is used in the WLAN:
You cannot enter any code you like as you like. The code you use and the code number you enter are de-
pendent upon the way the code was generated on the access point/router.
For security reasons there is no standard for the calculation of the code (different algo-
rithms are used to generate it). The allocation of a code is only possible if the access point/rou-
ter belongs to the same product series.
1 Click the opening arrow next to the Verschlüsselung
(Encryption) entry field and select the WEP menu
option.
2 Click the opening arrow next to the Schlüssellänge
(code length) entry field and then select the security
level: 64 bit or 128 bit.
3 You can enter the code in the following ways:
If the access point/router is a product of the T-Sinus,
Sinus or Speedport series W 500V, 1054, 730) and if
the code was generated by means of a keyword, click
the box beside Schlüsselwort (keyword): The entry
field is now active and you can enter the same combi-
nation of letters as was used for the access point/rou-
ter. Then you only have to select the number of the co-
de being used in the bottom field.
If the access point/router is not a product belonging
to the series named above, click the arrow beside the Schlüsseltyp (Code type) field and select HEX
(hexadecimal = numbers 0-9 and letters A-F, 10-digit) or ASCII (characters in the ASCII code list, maxi-
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Telekom Speedport W 100 Stick at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Telekom Speedport W 100 Stick in the language / languages: German as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Telekom Speedport W 100 Stick

Telekom Speedport W 100 Stick User Manual - German - 50 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info