Manual Telekom Sinus 1054 data (page 5 of 10) (English)

680858

Zoom out

Zoom in

1/10

14.01.2005 KA_GB_1054_data.fm

method which can be applied regardless of the operating system being used.

–

WPA-PSK:

(Wi-Fi Protected Access Pre-Shared Key = privacy comparable to that of a wired system, but

greater than WEP) using a varying encryption key, but a shared starting key) A method similar to WPA.

The change arises from a code mix from the client-related, static pre-shared key.

–

WPA with Tiny Server:

Here a server in the local network takes over the task of authentication between

the communicating devices. In addition to a password, the computer must identify itself by means of a

user name. You can obtain this name from your network administrator who has already stored it on the

Tiny Server.

–

WPA2 with RADIUS Server:

In this case an external server takes over the task of authentication

between the communicating devices in your network.

As a client in a network which has been protected in one of these ways, you personally have no

influence upon the method being used. You must comply with the specifications you have be-

en given and make the corresponding settings.

The encryption method and the corresponding encryption key must be the same for all com-

puters within the network in order that the PCs can communicate with one another.

When the stick leaves the works the encryption is set to AUS (OFF) and accordingly none of the input fields

are active. For this reason you will not - as a rule - be able to access an existing network which has already

been configured. The T-COM WLAN Manager icon in the Quick Launch bar is red if there is no connection.

If WEP is employed in the WLAN:

You cannot enter any key you like in any way you like.

Which key you use and with which code number

depends upon how it was generated on the access point/router.

For security reasons there are no rules determining how a key is calculated

(different algo-

rithms are used to calculate the code). When allocating the code via Schlüsselwort (key string),

check whether the access point into the WLAN is a

Sinus 154 DSL

T-Sinus 1054 DSL

. If this

is not the case, you must use the hexadecimal key with the corresponding code number which

was generated from the key string for these computers.

Click the opening arrow

next to Ver-

schlüsselung (Encryption) and select

WEP

in the menu.

Click the opening arrow

next to Ver-

schlüsselung and select either

64 bit

128 bit

as your key security level.

To enter the key you have the follo-

wing possibilities:

If the access point/router is a product

of the T-Sinus or Sinus series (130,

154, 1054, 530, 730) and the key

was generated by means of a key

string, you can click the box in front

of Schlüsselwort (key string): This ac-

tivates the input field allowing you to

enter the string of letters which were

used on the access point/router.

Then you only have to specify the correct code number in the bottom field (Standardschlüssel).

If the access point/router does not belong to one of the above-named series, click the opening arrow

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Telekom Sinus 1054 data in the language / languages: English as an attachment in your email.

The manual is 0,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Telekom Sinus 1054 data

Telekom Sinus 1054 data Additional guide - German - 4 pages

Telekom Sinus 1054 data Additional guide - German - 5 pages

Telekom Sinus 1054 data Quick start guide - German - 10 pages

Telekom Sinus 1054 data User Manual - German - 45 pages

Telekom Sinus 1054 data Quick start guide - Turkish - 10 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Telekom Sinus 1054 data Manual

Product: