486216
58
Zoom out
Zoom in
Previous page
1/86
Next page
TX Bluetooth 58
11. When the handset displays Headset A paired to base. Connect now? Press OK, then
press MENU/OK on the handset.
- When you already have two devices on the active devices list, the handset shows
Maximum of 2 devices can be connected. You are prompted to replace an existing
headset on the active devices list
- When you already have one headset on the active devices list, the handset shows
Only 1 headset can be connected. You are prompted to replace the headset on the
active devices list
10. When a device is successfully connected, the handset displays Headset setup
completed Device connected and the corresponding status icon (Mobile1 or Mobile 2).
Note: The pairing process may take up to one minute. If the pairing process fails, try again.
If you put the handset back in the telephone base or charger while pairing, the process
discontinues and the handset returns to idle mode.
Auto connection
When a device is successfully paired with the telephone base but not connected, the handset
displays Headset setup completed Device not connected and then Auto-connect function
enabled Press OK. You can press MENU/OK to exit. You can also connect a device manually.
E. Paired devices
All paired devices are stored on the Paired devices list.
Up to four devices (one headset only) can be paired with the telephone base.
To use a paired device, it must be connected and on the active devices list.
Once you have paired a device with the telephone base, you do not need to repeat the pairing
procedure
again unless you delete the device from the paired devices list.
Note: Only the first 15 characters of the device name are shown on the paired devices list.
Rename a paired device
You can change the name of a paired device on the paired devices list.
1. In standby mode, Press MENU/OK and choose Bluetooth
2. Select Paired devices,
3. Select the device you want to rename
4. Select Rename and Press MENU/OK
5. The screen displays ENTER NEW NAME.
6. Use the keypad to edit the name
7. Press MENU/OK to confirm. The handset displays Device renamed.
Remove a paired device
If you want to add another Bluetooth device and you already have the maximum of four devices on
the paired devices list, you must first delete a device from the paired devices list.
1. In standby mode, Press MENU/OK and select Bluetooth
2. Select Paired devices,
3. Select the device you want to remove
4. Select Remove paired.
5. The screen displays Remove device from paired list? Press Menu/OK to confirm
6. The handset displays Device removed from paired list.
F. Active devices
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Telefunken TX152 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Telefunken TX152 in the language / languages: English, German as an attachment in your email.

The manual is 2,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Telefunken TX152

Telefunken TX152 User Manual - French - 75 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info