519065
24
Zoom out
Zoom in
Previous page
1/44
Next page
h. Do not move or change the distance between the two remotes while learning all the required
keys for that Mode.
i. Do not attempt to learn directly under an incandescent or low-energy light as these can cause
interference with the IR transmissions. Keep at least one metre away from any such light
sources.
j. Avoid learning the Volume/Mute keys on your original remote unless you are sure these
operate the same target device e.g. some original DVD remotes also include TV Volume/Mute
key control – these can be two different types of code.
k. Avoid learning the VCR keys on your original remote unless you are sure these operate the
same target device e.g. some original TV remotes also include VCR key control – these can
be two different types of code.
l. Learning a key can take up to 3 seconds. Do not release the key being learned until the
“FERTIG” or “LERNEN FEHL.” screens have been displayed.
m.
If learning the first or second keys for a Mode results in continuous errors then try the following:
i. End the Learn session by pressing the Exit key.
ii. Clear out the learned commands for that Mode.
iii. Check the IR LEDs are correctly aligned between the two remotes.
iv. Adjust the distance between the two remotes to be closer (e.g. 15mm) or further away
(e.g. 50mm) from each other.
v. Try learning the original remote for that Mode again.
If the problem occurs again with the same key check the original remote key being learned –
does it transmit? Does it operate the target device? Try learning that key under a different
clear Mode. If it learns okay then it is likely to be a different code type from the others and
cannot be learned under the same Mode.
Notes:
1. You cannot learn under the Setup key.
2. All learned commands for a Mode are deleted if the same or a new 4-digit code is entered for
that Mode (includes Direct Code Entry, Code Search and Brand Search entries).
3. The Backlighting is turned off for Learning.
To Learn Commands:
a.
Press and hold Setup key until “CODE SETUP” is displayed (takes approximately 2-3 seconds).
b. Release Setup key.
c. Navigate to “LERNEN SETUP” by pressing the Setup key 3 times. Press and release OK key.
d. “LERNEN MODUS” is displayed. Press and release OK key.
e.
“QUELLENTASTE” is displayed. Press and release the desired Mode key (TV, VCR, DVD, etc.).
f. “LERNEN: TASTE“ is displayed. Press and release the LCD remote key to be taught with
original remote code.
g. “ORIG.-FB-TASTE” is displayed. Press and hold original remote key until the “FERTIG” or
“LERNEN FEHL.” screens have been displayed (see Tips on Learning) followed by the
“LERNEN MEHR?” screen (this process can take up to 2 or 3 seconds to complete). Release
the original remote key.
i. “LERNEN MEHR?” screen is still displayed. To learn more keys, press and release the OK key
and repeat from step “f”. To exit at this point, press and release the Exit key.
j. “WARTEN…” will be displayed briefly and the remote will exit Setup and return to normal
operation.
To clear Learn Commands
To Clear all stored Learned Commands under a Mode:
a.
Press and hold Setup key until “CODE SETUP” is displayed (takes approximately 2-3 seconds).
b. Release Setup key.
c. Navigate to “LERNEN SETUP”. Press and release OK key. “LERNEN MODUS” is displayed.
d. Navigate to “LOESCHEN MODUS”. Press and release OK key.
e.
“QUELLENTASTE” is displayed. Press and release the desired Mode key (TV, VCR, DVD, etc.).
f. “LOESCHEN BEST.” is displayed. Press and release OK key.
g. “WARTEN…” will be displayed briefly and the remote will exit Setup and return to normal
operation.
To Clear all stored Learned Commands (recommended on first time Learning):
a.
Press and hold Setup key until “CODE SETUP” is displayed (takes approximately 2-3 seconds).
b. Release Setup key.
c. Navigate to “LERNEN SETUP”. Press and release OK key. “LERNEN MODUS” is displayed.
d. Navigate to “LOESCHEN ALLES”. Press and release OK key.
e. “LOESCHEN BEST.” is displayed. Press and release OK key.
f. “WARTEN…” will be displayed briefly, then “FERTIG” and the remote will exit Setup and return
to normal operation
24
55415 BedienAnltg TeFu_Zweite Version 08.12.09 16:33 Seite 24
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Telefunken TRC 850 - 8in1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Telefunken TRC 850 - 8in1 in the language / languages: German as an attachment in your email.

The manual is 2,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Telefunken TRC 850 - 8in1

Telefunken TRC 850 - 8in1 User Manual - English - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info