519065
21
Zoom out
Zoom in
Previous page
1/44
Next page
21
Setting the Time of Day
To set the Time of day for normal LCD time display.:
a.
Press and hold Setup key until “CODE SETUP” is displayed (takes approximately 2-3 seconds).
b. Release Setup key.
c. Navigate to “SYSTEM SETUP”. Press and release OK key. “VOL/MUTE SETUP” is displayed.
d. Navigate to “TIME SETUP”. Press and release the OK key.
e. The “ZEIT?” screen is displayed showing current format (12 or 24 hour) flashing and current
time. Use the Up/Down keys to set the format (12Hr or 24Hr) then press and release the
OK key.
f. The “hours” will be flashing. Use the Up/Down keys to set the hours then press and release
the OK key.
g. The “minutes” will be flashing. Use the Up/Down keys to set the minutes then press and
release the OK key.
i. “FERTIG” will be displayed and the remote will remain in Setup, returning to the
“CODE SETUP” screen.
Setting the Date
To set the Month, Date and Day:
a.
Press and hold Setup key until “CODE SETUP” is displayed (takes approximately 2-3 seconds).
b. Release Setup key.
c. Navigate to “SYSTEM SETUP”. Press and release OK key. “VOL/MUTE SETUP” is displayed.
d. Navigate to “DATE SETUP”. Press and release the OK key.
e. The “JAHR?” screen is displayed with the last 2 year digits flashing. Use the Up/Down keys to
set the Year then press and release the OK key.
f. The “MONAT?” screen is displayed with the Month digits flashing. Use the Up/Down keys to
set the Month then press and release the OK key.
g. The “DATUM?” screen is displayed with the Date digits flashing. Use the Up/Down keys to set
the Date then press and release the OK key.
h. The “TAG?” screen is displayed with the Day flashing. Use the Up/Down keys to set the Day
then press and release the OK key.
i. “FERTIG” will be displayed and the remote will remain in Setup, returning to the
“CODE SETUP” screen.
Setting the Backlighting On time
Used for setting the backlight delay following a key action.
a.
Press and hold Setup key until “CODE SETUP” is displayed (takes approximately 2-3 seconds).
b. Release Setup key.
c. Navigate to “SYSTEM SETUP”. Press and release OK key. “VOL/MUTE SETUP” is displayed.
d. Navigate to “BELEUCHT.SETUP”. Press and release the OK key.
e. The “BEL. ZEIT SEK.” screen is displayed with the current Backlight On time digits flashing.
Use the Up/Down keys to set the Backlight On time in increments of 5 seconds up to a
maximum of 60 seconds. The default Backlight On time is 10 seconds. To turn the Back-
lighting feature off, set the time to “00” (zero). Press and release the OK key.
f. “FERTIG” will be displayed and the remote will remain in Setup, returning to the
“CODE SETUP” screen.
Reset the LCD Remote to Factory Defaults
To reset the LCD remote back to factory default settings. All User programmed parameters e.g.
code settings, learned commands, etc., are cleared to their respective default settings.
a.
Press and hold Setup key until “CODE SETUP” is displayed (takes approximately 2-3 seconds).
b. Release Setup key.
c. Navigate to “SYSTEM SETUP”. Press and release OK key. “VOL/MUTE SETUP” is displayed.
d. Navigate to “GERAETE RESET”. Press and release the OK key.
e. “BESTAET.RESET” is displayed. Press and release the OK key.
f. “WARTEN…” will be displayed while all parameters are Reset then the remote will exit Setup
and return to normal operation.
55415 BedienAnltg TeFu_Zweite Version 08.12.09 16:33 Seite 21
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Telefunken TRC 850 - 8in1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Telefunken TRC 850 - 8in1 in the language / languages: German as an attachment in your email.

The manual is 2,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Telefunken TRC 850 - 8in1

Telefunken TRC 850 - 8in1 User Manual - English - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info