486541
17
Zoom out
Zoom in
Previous page
1/22
Next page
- 16 -
Setting the Clock
The built-in clock shows the correct time in the display.
1. Press the clock button (CLOCK ) twice on the remote control, the hour indicator will blink.
2. Set the hour by tuning backward button (TU-) or tuning forward button (TU+).
3. Press the clock button (CLOCK) on the remote control, the minute indicator will blink.
4. Set the minute by tuning backward button (TU-) or tuning forward button (TU+).
5. Press the clock button (CLOCK) on the remote control, the built-in clock starts operating and the seconds start
counting from 0.
Note:
* You can set the clock in standby mode.
* The operating time of every step shouldn't be longer than 3 seconds or it will return to the original display.
* If there is a power failure or the power system is turned off, the clock loses its setting.
* When DVD function is selected, please do not use the remote control to set the clock, otherwise, the DVD will
fast forward or fast backward.
To confirm the clock time
If you press the clock button (CLOCK ) on the remote control, the clock time is displayed. Wait for a second until the
display returns to the original display.
Setting the Sleep Timer
Use the sleep timer to turn the system off after a certain number of minutes while it is playing. By setting the sleep
timer, you can fall asleep to music and know that your system will turn off by itself rather than play all night.
1. Play a disc or tune in to the desired station.
2. If you set the sleep timer first, each time you press the sleep button (SLEEP) on the remote control, it changes the
number of minutes shown on the VFD in this sequence:
If you change the sleep timer, each time you press the sleep button (SLEEP) on the remote control, it changes the
number of minutes shown on the VFD in this sequence:
After setting the number of minutes for the sleep timer, the display will return to the display as before setting the
sleep timer.
The system is now set to turn off after the number of minutes you set.
To confirm the sleep time
When the sleep button (SLEEP) on the remote control, the remaining sleep time is displayed. Wait for a second until
the display returns to the original display.
To cancel the sleep timer setting
Repeatedly press the sleep button (SLEEP) on the remote control until the 00 displays on the VFD.
Resetting the clock or turning off the system also cancels the sleep timer.
- -
10 20
...
80 90 00
- -
15 10 20
...
80 90 00
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Telefunken TNE 1302 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Telefunken TNE 1302 in the language / languages: English as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info