486541

Telefunken TNE 1302 Manual

9
Zoom out
Zoom in
Previous page
1/22
Next page
- 8 -
Control the Loudness
This unit has loudness function, it can automatically increase the bass sound effect at low volume (the higher volume,
the smaller bass increase), which improves the output sound. You only need to press the loudness button (LOUDNESS)
to obtain the loudness function when it is playing, LOUDNESS will be displayed on the VFD.
Changing the VFD Darkness
This unit has set several settings for you to adjust the VFD screen's brightness. You only need to press the VFD
darkness select button (DARKNESS) on the remote control in standby mode, then choose the proper lighting to be
used.
Listening to Radio Broadcasts
You can listen to FM and AM stations. Stations can be tuned in manually, automatically or from preset memory
storage.
Caution: Before listening to the radio, please check that both the FM and AM antennas are correctly connected.
Tuning in a station
1. Repeatedly press the function select button (FUNCTION) on the unit or directly press tuner function button
(TUNER) on the remote control to select TUNER function.
2. Press the band switch button (BAND) to select the band.
3. Use one of the following methods to select a station.
w Manual tuning
Press the tuning backward button (TU-) or tuning forward button (TU+) repeatedly to move from frequency to
frequency until you find the station you want.
w Auto tuning
If you press and hold the tuning backward button (TU-) or tuning forward button (TU+) for one second or more,
the frequency changes down, or up, automatically until a station is found.
w Preset tuning (Possible only after presetting stations)
Press the preset stations button (PRESET) on the unit or channel select backward button (CH-) or channel select
forward button (CH+) on the remote control one by one to select the preset number to select the desired preset
number. Its band and frequency are displayed on the VFD.
Presetting stations
You can preset up to 16 FM stations and up to 16 AM stations.
1. Tuning in the desired station.
2. Press the memory button (MEM) on the unit or memory button (MEMORY) on the remote control, the MEM
will flash on the VFD.
3. Press the preset stations button (PRESET) on the unit or channel select backward button (CH-) or channel select
forward button (CH+) on the remote control one by one to select the preset number to select the preset number,
MEM will flash on the VFD display and will preset the number.
* PRESET To select cyclically one of the 16 preset number
* CH- Decreases the preset number by 1
* CH+ Increases the preset number by 1
4. Press the memory button (MEM) on the unit or memory button (MEMORY) on the remote control to store the
station. After 1 second, the VFD returns to the broadcast frequency display.
5. Repeat above steps 1 to 4 for each station you want to store to memory with a preset number.
Note: If the system is unplugged or if a power failure occurs, the preset stations will not be erased.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Telefunken TNE 1302 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Telefunken TNE 1302 in the language / languages: English as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info