22
Initial Set-up and tuning
Setting up the player
■ Switch the TV on.
■ You can also start "AUTO SEARCH" from the "PR PRESET" menu by pressing buttons [VCR], [SETUP], [ ],
[OK] and [OK] again.
■ To tune in new stations (manual tuning) and to enter station names see page 34-36.
Press on the remote control and RF36
will be displayed on the front of your
player.
Select a free channel on your TV and
manual tune the channel until the blue
screen as shown in step 2 appears. Refer to
the TV manual for more details.
1
You should see this picture the first time
you switch on the TV and player.
Select the wanted language with PR+ or
PR- button. Press OK to confirm.
2
Select the wanted country with PR+ or PR-
button. Press OK to confirm.
3
• If you don't see the menu picture below after you press the menu button it may be because you don't use a
RCA cable and you need to tune the television to the player (see 'Connecting your player through RF lead' on
page 16). Normally a new player outputs a signal via the RF lead on transmission channel 36. Search for the
menu picture with the channel tuning function of your TV set (see its user manual).
Some televisions allow you to key in the transmission channel number in their tuning set-up menu.
• In case there will be interference problems with other transmission channels when the player outputs a signal
on transmission channel 36, the AUTO SEARCH process usually recommends an alternative, as in step 4.
• There is a another way of setting RF output channel, if needed please see 'Connections and Copying on page
44'. It does not apply to models which do not generate the RF output signal.
CHECK IT!
SETUP and
Navigation
OK
left, right, up
and down
LANGUAGE SET
ENGLISH
DEUTSCH
ITALIANO
ESPAÑOL
FRANÇAIS
NEDERLANDS
SVENSKA
SUOMI
PR+/-:SELECT
OK:CONFIRM SETUP:END
COUNTRY SET
AUSTRALIA
NEW ZEALAND
PR+/-:SELECT
OK:CONFIRM SETUP:END
DV6T714D-RG1H(TDV6000)1 02.8.12 10:18 AM ˘ ` 22 mac001 300DPI 120LPI
