English - 57 -
• Y ou must change your modem’s SSID when there are
any other modems around with the same SSID. Y ou
can encounter connection problems otherwise. Use
a wired connection if you experience problems with a
wireless connection.
&RQ¿JXULQJ:LUHOHVV'HYLFH6HWWLQJV
Open the Net work/Internet S ett ings menu and select
Network T ype as Wireless Device to start connection
process.
The TV will scan the wireless networks automatically .
A list of available networks will be displayed. Pleas e
select your desired network from the list.
Note: ,I WKH PRGHP VXSSRUWV 1 PRGH \RX VKRXOG VHW 1
mode settings.
If the selected network is protected with a password,
please enter the correct key by using the virtual
keyboard. Y ou can use this keyboard via the directional
buttons and the OK button on the remote control.
Wait until the IP address is shown on the screen.
This means that the connection is now established.
T o disconnect from a wireless network, highlight
Network T ype and press Left or Right buttons to set
as Disabled.
Highlight Internet Speed Test and press the OK button
to check your internet connection speed. Highlight
Advanced Settings and press the OK button to open
the advanced setting menu. Use directional and numeric
buttons to set. Pre ss t he OK button to save settings
when complete.
Other Information
The status of the connection will be displayed as
Connected or Not Connected and the current IP
address, if a connection is established.
Connecting to your mobile device via WiFi
• If your mobile device has WiFi feature, you can connect
it to your TV via a router , in order to access the content
in your device. For this, your mobile device must have
an appropriate sharing software.
• Connect to your router following the steps stated above
in the Wireless Connectivity section.
• Aft erwar ds, eng age yo ur mob ile device wi th the r outer
and then activate the sharing software on your mobile
GHY LFH 7KHQ VHOHFW ¿OHV WKDW \RX ZDQW WR VKDUH ZLWK
your TV .
• If the connection is established correctly , you will be
DEOH WRDFFHVV WKH VKDUHG¿OHV IURP \RXUPRELOH GHYLFH
via the Media Bro wser of your TV .
• Enter the Media B rowse r menu and the playback
device selection OSD will be displayed. Select your
mobile device and press the OK button to continue.
• If available, you can download a virtual remote
controller application from the server of your mobile
device application provider .
Note: This feature may not be supported on all mobile
devices.
Wake ON
Wake-on-LAN (W oL) and Wake-on-Wireless LAN
(WoWLAN) are standards that allow a device to be
turned on or woken up by a network message. The
message is sent to the device by a program running
on a remote device connected to the same local area
network, such as a smartphone.
Y our TV is WoL and WoWLAN compatible. T o enable
this feature set the Wak e O n option in the Network/
Internet Settings menu as On . It is necessary that
both the device, from which the network message will
be sent to the TV , and the TV are connected to the
same network. Wake On feature is only supported for
Android OS devices and can only be used via Y ouTube
DQG1HWÀL[DSSOLFDWLRQV
In order to use this feature the TV and the remote
device should be connected at least once while the
TV is on. If the TV is powered off, the connection
should be reestablished, the next time it is switched
on. Otherwise this feature will be unavailable. This
does not apply , when the TV is switched into the
standby mode.
The performance of some devices in the market,
may vary due to the software architecture. In order
to use Wake On feature with a better performance,
SOHDVH PDNHVXUH WKDW \RXUGHYLFH KDV ODWHVW¿UPZDUH
version.
Wireless Display
Wireless Display is a standard for streaming video and
sound content by Wi-Fi Alliance. This feature provides
the ability to use your TV as wireless display device.
Using with mobile devices
There are different standards which enable sharing of
screens including graphical, video and audio content
between your mobile device and TV .
3OXJ WKH ZLUHOHVV 86% GRQJOH WR 79 ¿UVW LI WKH 79
doesn’t have internal WiFi feature.
Then press the Source button on the remote and
switch to Wireless Display source.
A screen appears stating that the TV is ready for
connection.
Open the sharing application on your mobile device.
These applications are named differently for each
brand, please refer to the instruction manual of your
mobile device for detailed information.
Scan for devices. After you select your TV and
connect, the screen of your device will be displayed
on your TV .
Note: This feature can be used only if the mobile device
supports this feature. Scanning and connecting processes
differ according to the programme you use. Android based
English - 58 -
PRELOH GHYLFHV VKRXOG KDYH WKH VRIWZDUH YHUVLRQ 9
and above.
Connectivity T roubleshooting
Wireless Network Not Available
• (QVXUHWKDWDQ\¿UHZDOOVRI \RXUQHWZRUNDOORZWKH
TV wireless connection.
• T ry searching for wireless networks again, using the
Net work/Internet S ett ings menu screen.
If the wireless network does not function properly , try
using the wired network in your home. Refer to the
Wired Connectivity section for more information on
the process.
If the TV does not function using the wired connection,
check the modem (router). If the router does not
have a problem, check the internet connection of
your modem.
Connection is Slow
See the instruction book of your wireless modem to
get information on the internal service area, connection
speed, signal quality and other settings. Y ou need to
have a high speed connection for your modem.
Distruption during playback or slow
reactions
Y ou could try the following in such a case:
Keep at least three meters distance from microwave
ovens, mobile telephones, bluetooth devices or any
other Wi-Fi compatible devices. T ry changing the active
channel on the WLAN router .
Internet Connection Not A vailable / Audio Video
S ha r i n g Not Working
,I WKH 0$& DGGUHVV D XQLTXH LGHQWL¿HU QXPEHU RI
your PC or modem has been permanently registered,
it is possible that your TV might not connect to
the internet. In such a case, the MAC address is
authenticated each time when you connect to the
internet. This is a precaution against unauthorized
access. Since your TV has its own MAC address,
your internet service provider cannot validate the MAC
address of your TV . For this reason, your TV cannot
connect to the internet. Contact your internet service
provider and request information on how to connect
a different device, such as your TV , to the internet.
It is also possible that the connection may not be
available due to a firewall problem. If you think
this causes your problem, contact your internet
VHUYLFH SURYLGHU $¿UHZDOO PLJKWEH WKHUHDVRQ RI D
connectivity and discovery problem while using the
TV in Audio Video Sharing mode or while browsing
via Audio Video Sharing feature.
Invalid Domain
Ensure that you have already logged on to your PC
with an authorized username/password and also
ensure that your domain is active, prior to sharing
DQ\¿OHV LQ\RXUPHGLD VHUYHUSURJUDPRQ \RXU3&,I
the domain is invalid, this might cause problems while
EURZVLQJ¿OHVLQ $XGLR9LGHR6KDULQJPRGH
Using Audio V ideo Sharing Network Service
Audio Video Sharing feat ure us es a sta ndard that e ases
the viewing process of digital electronics and makes
them more convenient to use on a home network.
This standard allows you to view and play photos, music
and videos stored in the media server connected to your
home network.
1. Server Software Inst allation
The Audio Video Sharing featu re cannot be used if the
server programme is not installed onto your PC or if
the required media server software is not installed
onto the companion device. Please prepare your PC
with a proper server programme.
2. Connect to a Wired or Wireless Network
See the Wired/Wireless Connectivity chapters for
GHWDLOHGFRQ¿JXUDWLRQLQIRUPDWLRQ
3. Play Shared Files via Media Br ow se r
Select Media B rowse r by using the directional buttons
from the main menu and press OK . The media browser
will then be displayed.
Audio Video Sharing
Select the desired media type on the main media browser
menu and press OK,IVKDULQJFRQ¿JXUDWLRQV DUHVHW
properly , Device Selection screen will be displayed
after selecting the desired media type. If available
networks are found, they will be listed on this screen.
Select media server or network that you want to
connect to using the Up or Do wn buttons and press
OK. If you want to refresh the device list, press the
Green button. Y ou can press Menu to exit.
If you select the media type as Vide os and choose
a de vice from t he se lecti on me nu. Th en select the
IROGHUZLWKYLGHR ¿OHVLQLWRQWKHQH[W VFUHHQDQGDOO
WKHDYDLODEOHYLGHR¿OHVZLOOEHOLVWHG
T o play other media types from this screen, you can go
back to main Med ia Browser screen and select the
media type as desired and then perform the network
selection again. Or press the Blue button to switch to
next media type quickly without changing the network.
Refer to the Med ia Browser menu section for further
LQIRUPDWLRQRQ¿OHSOD\EDFN
If a problem occurs with the network, please switch
your television off at the wall socket and back on again.
Trick mode and jump are not supported with the Audio
Video Sharing feature.
PC/HDD/Media Player or any other devices that are
compatible should be used with a wired connection
for higher playback quality .
8VH D/$1 FRQQHFWLRQ IRUTXLFNHU ¿OH VKDULQJEHWZHHQ
other devices like computers.