Manual Telefunken D32F472R4CW (page 21 of 82) (English, German, French, Italian)

736256

Zoom out

Zoom in

1/82

English - 4 -

 Headphone connection

 Automatic programming system

 Manual tuning

 Automatic power down after up to eight hours

 Sleep timer

 Child lock

 Automatic sound mute when no transmission

 NTSC playback

 AVL (Automatic Volume Limiting)

 PLL (Frequency Search)

 PC input

 Game Mode (Optional)

 Picture off function

 Ethernet (LAN) for Internet connectivity and service

 802.11 a/b/g/n built in WLAN Support

 Audio Video Sharing

 HbbTV

Accessories Included

 Remote Control

 Batteries: 2 x AAA

 Instruction Book

Standby Notifications

If the TV does not receive any input signal (e.g. from

aerial or HDMI source) for 3 minutes, it will go

into standby. When you next switch-on, the following

message will be displayed: “

TV switched to stand-by

mode automatically because there was no signal

for a long time.”

The Auto TV OFF option(in the Settings>System

>More menu) could have been set to a value between

1 and 8 hours by default. If this setting is not set as Off

and the TV has been left on and not been operated

during the set time, it will switch into standby mode

after the set time has expired. Wh

en you next switch-on

the TV, the following message will be displayed. “TV

switched to stand-by mode automatically because

no operation was made for a long time.” Before the

TV switches into standby mode a dialogue window will

be displayed. If you do not press any button the TV

will switch into the standby mode after a waiting period

of about 5 minutes. You can highlight Yes and press

OK to switch the TV into standby mode immediately.

If you highlight No and press OK, the TV will remain

on. You can also choose to cancel the Auto TV OFF

function from this dialogue. Highlight Disable and

press OK, the TV will remain on and the function will

be cancelled. You can enable this function again by

changing the setting of the Auto TV OFF option from

the Settings>System>More menu.

TV Control Switch & Operation

1. Up direction

2. Down direction

3. 9ROXPH ,QIR  6RXUFHV /ඈVWVHOHFWඈRQ DQG

6WDQGE\2QVZඈWFK

The Control button allows you to control the Volume

/ Programme / Source and Standby-On functions of

the TV.

To change volume: Increase the volume by pushing

the button up. Decrease the volume by pushing the

button down.

To change channel: Press the middle of the button

in, the information banner will appear on the screen.

Scroll through the stored channels by pushing the

button up or down.

To change source: Press the middle of the button in

twice(for the second time in total), the source list will

appear on the screen. Scroll through the available

sources by pushing the button up or down.

To turn the TV off: Press the middle of the button in

and hold it down for a few seconds, the TV will turn

into standby mode.

To turn on the TV: Press the middle of the button in,

the TV will turn on.

Notes:

If you turn the TV off, this cycle starts again beginning with

the volume setting.

Main menu OSD cannot be displayed via control button.

Operation with the Remote Control

Press the Menu button on your remote control to

display main menu. Use the directional buttons and

OK button to navigate and set. Press Return/Back

or Menu button to quit a menu screen.

Input Selection

Once you have connected external systems to your

TV, you can switch to different input sources. Press the

Source button on your remote control consecutively

to select the different sources.

English - 5 -

Changing Channels and Volume

You can change the channel and adjust the volume

by using the Programme +/- and Volume +/- buttons

on the remote.

Using Main TV Menu

When the Menu button is pressed, the main TV menu

will appear at the bottom of the screen. You can

navigate through the menu items using the directional

buttons on the remote. To select an item or see the

sub-menu options of the highlighted menu press OK

button. When you highlight a menu option some of the

sub-menu items of this menu may appear on the upper

side of the menu bar for quick access. To use a quick

access item highlight it, press OK and set as desired

using the Left/Right directional buttons. When finished

press OK or Back/Return button to exit.

Press Exit button to close the main menu.

1. Home

When main menu is opened Home menu bar will

be highlighted. The content of the Home menu can

be customised by adding options from other menus.

Just highlight an option and press the Down direction

button on the remote. If you see Add to Home option

you can add it to the Home menu. Same way you

can delete or change the position of any item in the

Home menu. Press the Down direction button and

select Delete or Move option and press OK. In order

to move a menu item use the Right and Left direction

buttons to select the position that you want the item

to move to and press OK.

2. TV

2.1. Guide

You can access the electronic programme guide menu

using this option. Refer to Electronic Programme

Guide section for more information.

2.2. Channels

You can access the Channels menu using this option.

Refer to Using the Channel List section for more

information.

2.3. Timers

You can set timers for future events using the options of

this menu. You can also review the previously created

timers under this menu.

To add a new timer select the Add Timer tab using the

Left/Right buttons and press OK. Set the sub-menu

options as desired and when finished press OK. A new

timer will be created.

To edit a previously created timer, highlight that timer,

select the Edit Selected Timer tab and press OK.

Change the sub-menu options as desired and press

OK to save your settings.

To cancel an already set timer, highlight that timer,

select Delete Selected Timer tab and press OK. A

confirmation message will be displayed. Highlight Yes

and press OK to proceed. The timer will be cancelled.

It is not possible to set timers for two or more events

that will broadcasted in different channels at the same

time interval. In this case you will be asked to choose

one of these timers and cancel others. Highlight the

timer you want to cancel and press OK, Options menu

will be displayed. Then highlight Set/Cancel and press

OK to cancel that timer. You will have to save changes

after that. In order to do that press OK, highlight Save

Changes and press OK again.

3. Settings

You can manage the settings of your TV using the op-

tions of this menu. Refer to Settings Menu Contents

section for more information.

4. Apps

When your TV is connected to the Internet related

contents will also be available, including Apps related

contents. Using the Apps menu you can access and

manage your applications. You can add new apps from

the market or delete the existing ones. Refer to Apps

section for more information.

Sources

You can manage your input source references using

the options of this menu. To change the current source

highlight one of the options and press OK.

Source Settings

(GඈWWKHQDPHV HQDEOH RU GඈVDEOHVHOHFWHG VRXUFH

RSWඈRQV

Inserting the Batteries into the Remote

Remove the back cover to reveal the battery compart-

ment. Insert two size AAA batteries. Make sure the (+)

and (-) signs match (observe correct polarity). Do not

mix old and new batteries. Replace only with same or

equivalent type. Place the cover back on.

A message will be displayed on the screen when the

batteries are low and must be replaced. Note that when

the batteries are low, the performance of the remote

control may be impaired.

Batteries should not be exposed to excessive heat

such as sunshine, fire or the like.

Power Connection

IMPORTANT: The TV set is designed to operate on a

9$&+] supply. After unpacking, allow the

TV set to reach the ambient room temperature before

you connect the set to the mains. Plug the power cable

to the mains socket outlet.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Telefunken D32F472R4CW in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 4,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Telefunken D32F472R4CW Manual

Product: