456740
25
Zoom out
Zoom in
Previous page
1/64
Next page
3 Operation
GB
21
1. Switch on the device using the ON/OFF button . The
selector switch is in the fever measurement position (top/
). The set reference location is displayed by a corresponding
flashing symbol, (mouth), (armpit) and (anus).
2. Wait until the °C symbol flashes, indicating that the thermo-
meter is ready.
3. Move the switch down and then up again. The 3 symbols
of the reference part of the body are shown in the display for
approx. 3 seconds. The set symbol flashes, while the other
ones remain unchanged.
4. Press the START button to switch between the three
symbols within the 3 seconds. As soon as the change is re-
gistered, you will hear a short beep.
5. The selected symbol flashes. The setting is completed after 5
seconds and the thermometer is ready for the measurement.
3
7
2
3.3 Measuring the body temperature
NOTES, for the most accurate readings:
• The thermometer and the patient must remain in a stable
environment for at least 30 minutes before measuring the
temperature.
• Do not take a baby’s temperature during or directly after
breastfeeding.
• Do not use the thermometer in damp environments.
• Patients should not drink or eat directly before or during a
measurement, and they should avoid any physical
exertion.
• Clean the area where you are taking the temperature and
remove any dirt, hairs or sweat before moving the
sensor to the measuring position.
Continued —>
6
This is how to do it:
7
3.2 Change the unit of measurement
You may measure the body temperature in °C (Celsius) or °F
(Fahrenheit). This is how to do it:
1. The unit must be switched off.
2. Press and hold the START-button for at least 5 seconds,
until the current selected unit of measurement is displayed.
3. Another short press on the START-button changes the
unit of measurement. When the desired unit is displayed, wait
until all symbols are displayed. Now the thermometer is ready
for the measurement in the new selected unit of measurement.
4. Additionally all saved measurements are adjusted automatically
according to the newly selected unit of measurement.
2
2
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Telefunken 48615 NCT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Telefunken 48615 NCT in the language / languages: Dutch as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info