Manual Telair TIG3000D Inverter generator (page 22 of 48) (English)

688827

Zoom out

Zoom in

1/48

TIG 3000 D

Vers. 002

8.9.3 Low output voltage

the output

voltage has dropped too far below the minimum

limit, probably due to poor performance of the in-

ternal combustion engine or to a single very high

load being applied without the use of the BOOST

function, the generator stops, the red alarm LED

lights up (Fig. 30 ref. 8).

8.9.4 Oil pressure

insufficient

engine oil lubricant level or pressure has been

detected, the generator immediately stops and

the red alarm LED lights up.

8.9.5 Engine temperature too high

an exces-

sive engine temperature has been detected, the

generator immediately stops and the red alarm

LED lights up.

8.9.6 Data communications error

this message indicates that

there has been an error in communication be-

tween the control panel and the control board on

the generator. Check the connection. Obviously

this alarm cannot be cancelled merely by press-

ing the START/STOP button.

8.9.7 Error codes

Open the menu (as indicated in another part of

the manual) until the following text appears

By pressing BOOST and then START/STOP or

AUTO, the error codes of the last 10 recorded

alarm events can be viewed. This is the list of the

main alarm codes:

1 Start-up failed

2 Battery voltage too low

3 Motor over-revving

4 Oil level or pressure

5 Motor over-heating

9 Data connection to inverter lost

50 Short circuit on inverter output

51 Overload on inverter output

52 Inverter voltage too low

53 Inverter over-heating

57 An inverter input phase is missing

59 Inverter continuous voltage too high

8.10 Warning messages and causes

8.10.1 Check engine oil level

this message appears alter-

nately with the normal messages on the display

and is highlighted by the illumination of the red

LED (Fig. 30 ref. 7); it calls for the oil level to be

checked (and topped up if necessary).

Once the check has been completed, reset the

corresponding hour counter:

press the MENU button and the following mes-

sage will appear

Press the MENU button again to confirm reset-

ting of the hour counter. The following message

will appear

the red LED switches off (Fig. 30 ref. 7) and the

related message disappears from the display.

8.10.2 Engine oil replacement

this message appears alter-

nately with the normal messages on the display

and is highlighted by the illumination of the red

LED (Fig.30 ref.7); it calls for the engine oil to be

changed.

After completing the operation reset the corre-

sponding hour counter:

press the MENU button and the following mes-

sage will appear

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Telair TIG3000D Inverter generator in the language / languages: English as an attachment in your email.

The manual is 16,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Telair TIG3000D Inverter generator

Telair TIG3000D Inverter generator User Manual - Dutch - 48 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Telair TIG3000D Inverter generator Manual

Product: