Manual Telair TIG3000D Inverter generator (page 9 of 48) (English)

688827

Zoom out

Zoom in

1/48

Vers. 002

TIG 3000 D

3.3 Handling

Always observe safety and accident

prevention rules when lifting and handling.

Use lifting and handling equipment with ca-

pacity greater than the load to be lifted.

The generating sets, complete with their packag-

ing, can be handled using common lifting and

handling equipment. The packages have special

spacers to allow for transpallet forks insertion.

4 INSTALLATION

4.1 Preliminary information

Incorrect installation of the generating

set can cause irreparable damage to the

equipment and compromise the safety of the

user.

The generator must be installed in

such a way as to prevent water infiltration,

therefore, it must be protected especially

when installed under vehicles.

If generating sets are installed not in compliance

with the instructions in this manual, the Manufac-

turer will not be held responsible for any malfunc-

tioning or safety issues regarding the generating

set, pursuant to Machinery Directive 2006/42/CE.

Moreover, the manufacturer will not be liable for

any resulting injury or damage.

4.2 Instructions for generating set fixing

The generator is equipped with 4 support brack-

ets (fig.4, ref. 2) fixed on the sides that allow for

both wall mounting and floor mounting. 4 cylindri-

cal vibration damping mounts (fig. 4 ref. 1) and 2

omega shaped mounting brackets (fig.4, ref. 3)

are supplied, particularly useful for equipment fix-

ing in a hanging configuration.

4.2.1 Ventilation and protection

For cooling purposes, the generating set lets

fresh air in through the air inlet provided on the

door (fig. 5 ref. 1), and lets warm air out through

the protected opening (fig. 5 ref. 2) and exhaust

gas on its way to the muffler through the hole (fig.

5 ref. 3) on the bottom.

Sufficient space for air circulation must be al-

lowed around the generator set hood; in particu-

lar, at least 10 cm of space should be ensured in

front of the air inlet on the door.

In the event that the generator is installed in the

vicinity of a vehicle wheel, apply a suitable pro-

tector (splash guard) to prevent rain, mud and

sand raised by the wheel affecting the generator

or entering through the ventilation air inlet.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Telair TIG3000D Inverter generator in the language / languages: English as an attachment in your email.

The manual is 16,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Telair TIG3000D Inverter generator

Telair TIG3000D Inverter generator User Manual - Dutch - 48 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Telair TIG3000D Inverter generator Manual

Product: