688826
25
Zoom out
Zoom in
Previous page
1/44
Next page
Vers. 001
TIG 3000 B
25
GB
read after screwing the cap all the way into its
seat.
If the oil level fails to reach the upper notch on
the dipstick (fig. 36), top up via the access hole
itself.
To restore the oil level use the same type of lu-
bricant already present in the engine.
Once the task has been completed make sure
the cap is securely in its seat.
Do not pour oil to exceed the maxi-
mum level indicated on the dipstick.
9.3 Maintenance operations to be carried out
by skilled personnel
9.3.1 Engine oil replacement
Hot oil can scald.
Operating the generating set with a low
level of lubricant would severely damage
the engine.
To make it easier to drain the spent engine oil, it
is advisable to let the engine run for approxi-
mately 2 minutes; in this way, the oil will be more
fluid and emptying will be quicker and more thor-
ough.
The drain plug for emptying the oil sump is lo-
cated on the generator underside (fig.37 ref. 1).
Remove the oil filler cap (fig. 35 ref. 1).
Remove the rubber guard (fig. 37 ref. 4) on the
generator bottom. Then remove the drain plug
and relative gasket (fig. 37 ref. 3 and ref. 2) and
drain all the oil into a container suitable for collec-
tion of the spent lubricant.
After emptying, screw the drain plug back in and
restore the lubricant level through the special
filler (fig.35 ref. 1) by checking the level with the
dipstick (fig.36). Fill the oil sump with approxi-
mately 0.6 litres of oil.
Use multigrade type oil for petrol engines with a
SAE viscosity degree suitable for the local cli-
mate according to the table.
Spent oil should not be disposed
freely in the environment but taken to special
disposal centres carrying out disposal and/or
recycling in compliance with the applicable
law provisions in force in the country of use.
9.3.2 Extraction generator from its hood
Have appropriate equipment on hand
capable of supporting the weight of the gen-
erator when not supported by the case.
For cold
climates
For hot climates
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Telair TIG3000B Inverter generator at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Telair TIG3000B Inverter generator in the language / languages: English as an attachment in your email.

The manual is 12,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Telair TIG3000B Inverter generator

Telair TIG3000B Inverter generator User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info