688826
10
Zoom out
Zoom in
Previous page
1/44
Next page
TIG 3000 B
Vers. 001
10
GB
4.2.2 Hanging installation
The generator is provided with supporting brack-
ets designed for fixing in a hanging configuration.
Figure 6 shows the arrangement of the fixing
brackets and vibration damping cylinders.
Figure 7 shows the generator with the mounting
brackets and damping mounts correctly installed
on the generator.
The vibration damping cylinders are
designed to work in compression and must
be assembled as shown in figures 6 and 7.
Installation in a pulling configuration as
shown in fig. 8 is strictly not permitted!
Ensure that the ride height of the gen-
erator is not such as to risk contact with the
ground during travel. A good rule is to ensure
that the ride height of the lowest point of the
generator is not less than that of the other
components of the vehicle on which it is in-
stalled.
4.2.3 Floor mounting
The TIG3000B can be installed on a table/shelf.
To do this remove the two support brackets (fig.
9 ref. 1) from the upper part of the generator, ro-
tate them 180 degrees and attach them to the
lower part using the screws (fig. 9 ref. 2), as indi-
cated. Once the task has been completed make
sure all the screws that lock the two brackets are
securely.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Telair TIG3000B Inverter generator at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Telair TIG3000B Inverter generator in the language / languages: English as an attachment in your email.

The manual is 12,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Telair TIG3000B Inverter generator

Telair TIG3000B Inverter generator User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info