Manual Telair TIG 3000G (page 11 of 44) (English)

688847

Zoom out

Zoom in

1/44

Vers. 001

TIG 3000 G

For quick preparation of the support surface, the

generator is supplied with a drilling template

(fig.10).

On the mounting surface, 4 vibration mount fas-

tening holes should be drilled (fig. 11 ref. 1), as

well as a fresh air intake hole (fig. 11 ref. 2), an

access hole for the engine oil drain plug (fig. 11

ref. 3), two holes to vent hot air and allow the ex-

haust pipe to exit (fig. 11 ref. 4).

To prevent the generator sucking the hot exhaust

air back in, a closed-cell heat-resistant foam rub-

ber seal should be placed around the latter two.

The seal must be high enough to create a sealed

duct between the bottom of the generator and the

surface (fig. 11 ref. 5).

If hot air is recycled by the generator,

in addition to a system shutdown occurring

when the safety temperature threshold is

reached, irreparable damage may occur to the

internal combustion engine and the electronic

boards.

4.3 Connecting the external exhaust silencer

The generator is supplied with an external ex-

haust silencer kit consisting of the silencer, a

flexible steel pipe and accessories for generating

set connection and fixing.

As a first step the generator internal muffler

(fig.12 ref. 1) must be fixed to the supplied cou-

pling (fig.12 ref. 3) by interposing the seal (fig.12

ref. 2).

Insert at one end of the 2 m long flexible steel

pipe (fig.12 ref. 2) the D.32-35 fixing clamp

(fig.13 ref. 3), insert the pipe on the previously in-

stalled exhaust coupling (fig.13 ref. 1) up to a

length of at least 3 cm, then tighten the clamp on

to the coupling/pipe connecting section.

Insert the clamp D.32-35 (Fig.13 ref. 5) at the

other end of the flex hose. Insert the silencer in

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Telair TIG 3000G in the language / languages: English as an attachment in your email.

The manual is 12,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Telair TIG 3000G Manual

Product: