688847
7
Zoom out
Zoom in
Previous page
1/44
Next page
Vers. 001
TIG 3000 G
7
GB
1 GENERAL INFORMATION
The generating set TIG3000G, shortly referred to
as generator here below, is designed to be in-
stalled on vehicles, although this does not ex-
clude its use in stationary applications requiring a
versatile, stable and reliable power source, apply-
ing the latest technology.
It consists of an internal combustion Otto-cycle
engine, a high frequency three-phase alternator
and an inverter able to deliver 230 V 50 Hz alter-
nating voltage and 12 V direct voltage to charge
the connected battery.
It is enclosed in a steel plate casing, insulated
and sound-proofed using special sound absorb-
ing materials.
The engine fuel is LPG in a gaseous state.
Where the fuel is compatible, it can be taken from
the tank set aside for camper utilities or the vehi-
cle fuel tank. If the fuel is not compatible it will be
necessary to connect up a bottle or install an
LPG tank; in any case, they must have a suitable
pressure reducer
The generator can be controlled traditionally via
the remote control panel (supplied), which can be
installed inside the vehicle, or via a domotics con-
trol unit (Teleco HUB, optional).
As part of its product development and upgrade
policy, the manufacturer reserves the right to in-
troduce modifications without prior notice.
2 CHARACTERISTICS
2.1 Technical Specifications
Output voltage:
V ac 230 ± 2%
Output frequency:
Hz 50 ± 1
Maximum continuous power:
kW 2.5 @ cosΦ 1
Maximum peak power:
kW 2.7 (including consumption of the battery charger)
Engine:
Yamaha MZ175-30ise, single-cylinder air-cooled
Displacement:
cm³ 171
Start:
electric
Power supply:
LPG in a gaseous state (butane or propane, depending on
ambient temperature)
LPG pressure:
mb 30 (higher pressures damage the generator)
Average consumption:
g/kWh 350 (at max power)
Oil sump capacity:
litres 0.6
Battery voltage:
V dc 12 V
Battery charger voltage:
V dc 13.6 V
Battery charger current:
A 10 max
Battery capacity:
Ah > 40 with inrush current >60 A
Current consumption in Off
state:
mA <= 0,5
Current consumption in
Stand-by state:
mA <= 60
Control:
Electronic control panel, remote switch or domotics control
unit (Teleco HUB)
Operating temperatures:
°C -20 ÷ 40
Generator only weight:
kg 53
Total weight:
kg 62
Noise level:
dBA 52 ÷ 60 @ 7 m, depending on the connected load
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Telair TIG 3000G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Telair TIG 3000G in the language / languages: English as an attachment in your email.

The manual is 12,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info