688824
9
Zoom out
Zoom in
Previous page
1/24
Next page
9
GB
Before making any
electrical connections always make sure
the power is disconnected inside the
distribution board and that the wire ends
are not live.
It is compulsory for the air conditioner to be
powered via a separate line protected by a 10
A thermomagnetic switch.
To ensure good
insulation under all possible conditions
electrical wiring must be properly
sheathed.
4.3 Positioning the air conditioner
Before installation, check
that the cylindrical section seal on the air
conditioner base is still correctly
positioned inside its special frame seat
(Fig. 7 ref. 1).
Before positioning the air conditioner on the
vehicle roof it is necessary to lay a sufficient
amount of slow-drying sealant around the rim
of the aperture.
Bring the air conditioner onto the roof (fig. 7
ref. 2) and, without scraping it, position it
over the 395 x 395 mm opening previously
lined with sealant. Correct alignment of the
air conditioner on the roof will provide a view
- from inside the camper - of the 4 threaded
fixing seats.
The arrow in fig. 7 indicates direction of
forward drive.
Working from inside the vehicle, shift the air
conditioner until the four fixing threads are
aligned with the square 395 x 395 mm
opening of the hole on the roof.
Line the four external sides of the connecting
duct with adhesive insulating tape so that it
adheres to the folded fixing edge (fig. 8).
Working from inside the camper, insert the
connection outlet at the base of the air
conditioner; use the four supplied 12 mm long
self-tapping screws to fix it. Align with the
rectangular hole of the fan (Fig. 9). The arrow
in figure 9 indicates the vehicle driving
direction.
Fit the air/block tunnel with the supplied
screws (fig. 10). It is important to attach the
screws according to a driving torque of
2 N m, that is, 0.2 kgm.
You are advised to use a torque wrench.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Telair SILENT 8400H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Telair SILENT 8400H in the language / languages: English as an attachment in your email.

The manual is 2,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Telair SILENT 8400H

Telair SILENT 8400H User Manual - German - 24 pages

Telair SILENT 8400H User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info