688850

Telair Energy 2510g Manual

16
Zoom out
Zoom in
Previous page
1/40
Next page
Energy 2510 G Vers. 001
16
G
B
Fix the flexible hose (Fig.26 Ref.2) to the silencer
terminal on the inlet side (Fig.26 Ref.1) by using
the other supplied clamp (Fig.26 Ref.3).
Replace the flame trap parts (Fig.27 Ref. 2 – 3 –
4 – 5) on the silencer terminal and, by using the
bracket welded on the silencer, fix it at a position
where it is not likely to hinder electric cables or
fuel pipes.
Do not use silencers not
supplied by TELAIR Silencers that have not
been specially sized may damage the motor.
4.13 Connecting an External Network Relay
An (optional) relay or change-over switch code
05423 (Fig.28) should be fitted to the vehicle
wiring system. Its purpose is to insulate the
generating set when the vehicle is connected to
an external electric input network.
Connect the relay (Fig.29) according to the
following instructions:
• Connect the two wires of the 230 V line of the
generating set to the PINS 1 - 3.
• Connect the user line to the PINS 7 - 9.
• Connect the outside line to the PINS 6 – 4.
• Jumper the PINS 4 – A.
• Jumper the PINS 6 – B.
• Connect all the grounding cables together
Electric connections to
the generating set should be carried out by
skilled electricians only.
5 OPERATING INSTRUCTIONS
The generating set is
delivered without engine oil.
Use detergent oil for multigrade 4-stroke
petrol engines, having SAE viscosity suitable
for the operating climate (see table and
detailed indications on the user and
maintenance manual of the engine).
ENERGY series generators consist of petrol
internal combustion engines connected to an
alternator that can produce both alternating and
direct electrical current. The generating sets are
assembled inside a steel plate casing, insulated
and sound-proofed using special sound
absorbing materials.
Fuel is fed to the internal combustion engine via
a pump fitted to the generating set as part of the
standard supply.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Telair Energy 2510g at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Telair Energy 2510g in the language / languages: English as an attachment in your email.

The manual is 4,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info