Manual Telair Energy 2510b (page 8 of 40) (English)

688849

8

Zoom out

Zoom in

Previous page

1/40

Next page

Energy 2510 B

Vers. 002

GB

8

3.3 Handling

The generating sets, complete with their packag-

ing, can be handled using common lifting and

transport vehicles.

The boxes are provided with spacers in order to

allow for the introduction of pallet truck forks.

During lifting and trans-

port, comply with accident prevention and

safety regulations. Use lifting and transport

equipment with a capacity greater than the

load to be lifted.

4 INSTALLATION

4.1 Preliminary information

Before installing the gen-

erator set, it is absolutely necessary to read

these instructions to prevent any installation

errors.

The generator must be in-

stalled so as to prevent water seeping directly

into the alternator through the air inlets; it

must therefore be protected.

Incorrect installation of generating sets can

cause irreparable damage to the equipment

and endanger the safety of users.

Should the generating sets be installed not in

compliance with the instructions in this manual,

the Manufacturer shall not be held responsible

for malfunctioning or for the safety of the generat-

ing set, by the terms of the Law Decree

2006/42/EEC. The Manufacturer shall also not be

liable for any injury or damage to people or prop-

erty.

Installation must be per-

formed by qualified and adequately trained

personnel only.

4.2 Instructions for fastening the generating

set

The ENERGY 2510 B generating sets are pro-

vided with anchoring brackets with extra vibration

dampers and a fuel filter to be fitted along the

generator feeding pipe. The brackets allow for

hanging and floor assembly.

This kind of assembly provides the following ad-

vantages: less room taken up, quick installation,

easy access for routine and unscheduled main-

tenance.

Make sure that there is enough room around the

hood of the generating set to let cooling air

through; also leave 10 cm free room between the

hood and the surrounding parts.

Should the generating set air intake be behind a

wheel of the vehicle, care should be taken to

prevent water from being sprayed into the

generating set by the wheel when raining.

Ensure that, when the door

is open, the engine sliding surface can be

taken out (Fig. 6).

4.2.1 Hanging assembly

The generator, when sticking out of the package,

is preset for hanging assembly, as shown in fig.

4.

The package also contains 4 vibration-damping

cylinders (fig. 5 ref.1) and 2 brackets for hanging

assembly (fig. 5 ref. 2).

The

vibration-damping

cylinders must imperatively be fitted as

shown in fig. 5. They must be pressed, and

NOT extended (as shown in fig. 6) by the gen-

erator weight.

1

Hello,
I can not get start on my Telair Energy 2510b. It seems to me that the fuel do not reach the "engine".
Fuel pump?

Det ser ikke ut som bensinen suges fra bensintanken. Kan dette være årsaken og evnt.hva må gjøres?
Jeg tatt service, skiftet olje, skiftet tennplugg og rengjort luftfilter.

mvh
Thor, +4795972210
thor@jemtland.no

Submitted on 8-7-2022 at 08:48
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Telair Energy 2510b at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Telair Energy 2510b in the language / languages: English as an attachment in your email.

The manual is 4,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info