22590
4
Zoom out
Zoom in
Previous page
1/11
Next page
GB
14 223291
Parboiling boost
Switch on the cooking zone by means of corresponding
cooking zone key
0. Press the Minus key ! and select
cooking level 9. Then switch on the parboiling boost by means
of the Plus key
5. During the parboiling stage, the cooking
level display
1 switches continuously between the "A" sign
(parboiling boost) and the cooking level which has been set.
Now you can select the subsequent cooking level 1 - 8. If you
quit cooking level 9 without selecting a subsequent cooking
level from 1-8, then the parboil boost is shut off automatically
after 10 seconds. The parboiling boost time depends on the
subsequent cooking level which has been selected. Details
are given in the accompanying time chart.
If the Plus key
5 is selected after the required subsequent
cooking level has been selected, the parboiling boost time is
adjusted upwards in accordance with the time chart. If the
Minus key
! is pressed after the required subsequent cooking
level has been deselected, the parboiling boost is stopped
beforehand.
Two-circuit- / three-circuit connection
Two-circuit- / three-circuit connection of the respective cooking zone can only be effected after the corresponding
cooking zone has been activated and switched on.
Select the desired cooking level 1-9. Switch on the second heating element by means of the Multi-circuit key
4.
The control lamp
3 of the selected cooking zone lights up. Connect the third heating circuit by pressing the Multi-
circuit key
4 once again. The second control lamp 3 lights up. The corresponding cooking zone must also be
activated in order to switch off the two-circuit- / three-circuit connection. The outer heating circuits are switched off
by pressing the Multi-circuit key
4 once again. The control lamps 3 are then no longer lit.
Pot Recognition (PR)
If your range is equipped with Pot Recognition the PR will check whether a metal pot is on the cooking zone after
a cooking level has been selected. If no pot is recognized, a
u will appear in the display and the heating element
will remain inactive. If a pot is now placed on the cooking zone within 10 minutes, the heating element will turn
itself on and the selected cooking level will appear in the display. Cooking zones with two-circuit heating or frying
zone will automatically be re-powered, i.e., the PR also recognizes the size of the pot. If no pot is placed on the
cooking zone, the range will turn off after 10 minutes for safety reasons.
The PR recognizes only metal pots. To be able to cook with non-metallic cooking ware, as well, the PR can be
turned off for each cooking zone. To do this, the required cooking zone
0 must be activated 2 and a cooking level
selected. Now the Multi-circuit key
4 and then the corresponding cooking zone key 0 should be pressed. Cooking
can now be done without PR. The two-circuit heating or frying zone can now be re-powered by means of the Multi-
circuit key
4.
To reactivate PR, turn off the cooking zone. When the cooking zone is turned on again, PR will again be active.
When can Pot Recognition be switched off?
1. When using non-metallic pots.
2. For pots which, because of their size or material, switch on the outer element in the case
of multiple circuit cooking zones without sufficiently covering them.
For safety reasons, turn off the cooking zone after use by means of the Touch-Control, so that the shifting of
pots or setting down of metal objects does not accidentally activate a cooking zone while PR is still turned on.
Timer
The timer can be used to automatically switch off a cooking zone after a pre-set time of between 1 and 99 minutes.
The required cooking zone must be activated, stand-by dot
2 lights up. Select a cooking level from 1 to 9 by
means of the Minus or Plus keys
!/5. Then press Timer key ". The timer display 6 shows ”00”. Select the
required cooking time between 1 and 99 minutes by means of the Minus or Plus keys
!/5. The control lamp 7
T
a
bl
e o
f
ti
mes
PB = Parboiling boost,
time in minutes, seconds
Cooking level PB (min:sec)
101:00
203:00
304:48
406:30
508:30
602:30
703:30
804:30
9—:
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Teka VRTC90_OC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Teka VRTC90_OC in the language / languages: English as an attachment in your email.

The manual is 0,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Teka VRTC90_OC

Teka VRTC90_OC User Manual - French - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info