Manual Teka TKS3 1061 (page 9 of 109) (English, Portuguese, Spanish)

781293

Zoom out

Zoom in

1/109

Install Washing Machine

3.Ensure the positioning status of washing machine. Loosen the lock nut with spanner

and turn the leg with hand until it closely contacts with the floor. Press the leg with one

hand and fasten the nut closely to the cabinet with the other hand.

4.After being locked properly, press four corners again to make sure that they has been

adjusted properly. If it is still unstable, it has to repeat Steps 2 and 3.

Connect inlet pipe

Connect the inlet pipe as indicated in the figure.

For the model which has hot valve , please connect

the hot vale to hot water tap. Energy will decrease

automatically for some program.

Install inlet pipe

1.Connect the elbow to tap and fasten it

clockwise.

2.Connect the other end of inlet pipe to the inlet

valve at the backside of washing machine and

fasten the pipe tightly clockwise.

Notes: after connection, if there is any leakage

with hose, then repeat the steps to connect inlet

pipe. The most common type of tap shall be

used to supply water. If tap is square or too big,

then standard tap shall be changed.

Place outlet hose

There are two ways to place the end of outlet hose:

1.Put it beside the water trough.

5.Put a solid cylinder (e.g. pop cans) oppositely on the top cover of the washing machine from in

the left, right, front and back directions. If the cylinder keeps stable, the washing machine is

positioned level. If it rolls, the washing machine is positioned unlevel. The rolling direction is the

direction of lower ground surface.Then, the two legs in this direction shall be raised at the same time

until the washing machine is level. Steps 1~3 are repeated to make the bottom legs closely against

the ground and the nuts shall be locked tightly.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Teka TKS3 1061 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 14.95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Teka TKS3 1061 Manual

Product: