77356
41
Zoom out
Zoom in
Previous page
1/112
Next page
Installation instructions 41
Tips for Energy Savings
Try not to open the door too often,
especially when the weather is wet and
hot. Once you open the door, mind to
close it as soon as possible. This is
especially important if you have an
upright model.
Check periodically if the appliance is
provided with sufficient cooling
(undisturbed circulation of air through the
bottom rail openings).
Turn the thermostat knob from higher to
lower setting as soon as possible (depends on how loaded the
appliance is, ambient temperature...).
Before loading the appliance with fresh food, make sure it was cooled
to ambient temperature.
Ice and frost layer increase energy consumption, so do clean the
appliance as soon as the layer is 3-5 mm thick.
If the gasket is damaged or if it turns out that the sealing is poor, the
energy consumption is substantially higher. To restore efficiency,
replace the gasket.
Condenser at the bottom of the appliance must always be clean and
dust free (see Section Cleaning of the Appliance).
Always consider instructions stated in sections Positioning and
Energy Saving Tips, otherwise the energy consumption is
substantially higher.
Important
If you have bought this appliance to replace an old one equipped with
a lock that cannot be opened from inside (lock, bolt), make sure that
the lock is broken. This will make it impossible for children to lock
themselves inside the appliance and suffocate.
The appliance must be correctly connected to the mains supply. (see:
Connecting to the Mains Supply).
If the food has strange smell or color, throw it away, because it is
very likely that it is spoiled and therefore dangerous to eat.
Disconnect the appliance from the power supply before repairing it
(only a qualified technician should repair it), before cleaning and
before replacing the light bulb.
Do not defrost the appliance with other electric appliances (as for
example with hair dryer) and never scrape the frost layer with sharp
objects. Use only enclosed tools or tools recommended by the
manufacturer.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Teka TFI 130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Teka TFI 130 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 3,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info