Manual Teka TBC 32000 XFL (page 43 of 96) (English, German, French, Polish, Portuguese, Turkish, Spanish)

781116

Zoom out

Zoom in

1/96

Ceramic hobs with controls

instructions

Each of the glass ceramic hob’s heating

elements is connected to a power regula-

tor that controls the operating and stoppa-

ge time of each of them (more or less

heat). (See fig. 9)

Each power regulator control knob has

numbering from “0” to “12”.

The hob with the integrated controls

(model VT CM) has the numbering on the

glass. (See fig. 10).

fig.

At postion “0” the hob does not operate, at

position “1” there is not much operating

time but a great deal of stoppage time.

With the remaining control knob positions,

the operating time increases while the

stoppage time decreases, until at position

“12” where operation is continuous, only

cutting off when the warm hotplate’s ther-

mostat cuts in to turn off the power when

the maximum permitted temperature is re-

ached.

DOUBLE CIRCUIT INSTRUCTIONS

The double circuit heating elements are

hotplates made up of two mutually inde-

pendent heating elements, and they are

controlled by a power regulator that allows

the smaller, inside ring to be turned on, or

both inside and outside at the same time.

To only have the inside ring turned on, turn

the control knob clockwise and set it to the

position you require. To turn on the whole

hotplate, set the control to position “12”

and go on turning, gently, until it goes past

“0” and you hear a “CLICK”. Then set the

control to the position required. When the

whole hotplate is turned on, and you only

want to have the smaller ring working, set

the control to ZERO and then turn it on

again.

Whether only one ring is turned on, or

both, you can regulate the temperature by

setting the control to intermediary posi-

tions, just as with the normal and halogen

hobs described in the previous paragraph.

With double circuit regulators, when

the control is set to “0” it may only be

turned clockwise, as there is a catch

which prevents you moving from “0” to

“12” and vice-versa.

Before turning on one of the hob’s heating

elements, you should identify the corres-

ponding control. To this end, it is shown

beside each control which heating element

it corresponds to.

The amber indicator light at the front of the

controls shows that one or more heaters is

in operation. The indicator light is situated

below the glass on the model VT CM.

RESIDUAL HEAT INDICATORS

When a heating area reaches a tempera-

ture of more than 60±15ºC the correspon-

ding residual heat indicator comes on, and

stays on - even if the control is set to zero

- until the temperature drops. However,

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Teka TBC 32000 XFL in the language / languages: English, German, French, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 10.35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Teka TBC 32000 XFL Manual

Product: