336432
14
Zoom out
Zoom in
Previous page
1/22
Next page
GB
14
To activate or deactivate the function,
simply keep pressing the sensor (8)
for about 1 second. When the function is
active, the pilot light (10) turns on.
Detecting pans
(induction hotplates)
The induction cooking plates incorporate a
container detector. This is to avoid the
plate operating without having a pan on
top or when the container is unsuitable,
e.g., if made of aluminium or another non-
metallic material.
The power indicator blinks if, with the plate
turned on, no container or an inappropria-
te container is detected.
If the containers are removed from the hot-
plate while operating, this will automati-
cally cut off the power supply and the
power indicator will blinks. When putting
the container on the cooking hotplate
again, the power supply restarts at the
power level that was selected.
The time for detecting the container is 3
minutes. If three minutes go by without
having placed a container on the hotplate
or if an inappropriate container is placed
there, the cooking plate deactivates.
After use, always disconnect the
cooking plate. It is not sufficient to
remove the container. Otherwise, unde-
sirable operation of the plate may occur
if another container were placed by
mistake during the container detection
period. Avoid possible accidents!
Power supplied according to
the power level selected
Bear in mind that induction areas adjust the
amount of power supplied according to the
size and type (material) of pan placed on
them. A smaller pan will receive less power
than a larger one. Thus, depending on the
pan being used, the power supplied may
vary from the values shown in Table 1.
*The exact power will depend of the size and shape of the pan.
Table 1
o
1
2
3
4
5
6
7
8
9
P
Power
selected
INDUCTION HOTPLATES
Power in watts*
Ø 260 mm Hotplate
54
72
120
180
276
450
600
840
1140
1440
1800
70
110
150
240
500
600
850
1100
1550
2100
3000
Ø 210 mm
Hotplate
Ø 180 mm
Hotplate
50
90
120
170
300
450
600
850
1150
1600
2300
Ø 145 mm
Hotplate
40
70
100
140
200
300
450
600
800
1100
1800
Inner area Both areas
90
120
200
300
460
750
1000
1400
1900
2400
3200
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Teka it 641 exp at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Teka it 641 exp in the language / languages: English as an attachment in your email.

The manual is 0,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info