Manual Teka IT 612 (page 16 of 25) (English, German, French)

781078

Zoom out

Zoom in

1/25

After use, always disconnect the

cooking plate. It is not sufficient to

remove the container. Otherwise, unde-

sirable operation of the plate may occur

if another container were placed by

mistake during the container detection

period. Avoid possible accidents!

Power supplied according to

the power level selected

Bear in mind that induction areas adjust the

amount of power supplied according to the

size and type (material) of pan placed on

them. A smaller pan will receive less power

than a larger one. Thus, depending on the

pan being used, the power supplied may

vary from the values shown in Table 1.

Power function

This function makes it possible to give a

plate "extra" power, higher than the nomi-

nal. This power level depends on the size

of the plate (see values indicated with * in

the Presentation section), reaching up to

3,200 or 3,700 W (according to the model)

on the larger plates.

POWER FUNCTION CONNECTION

1Activate the plate corresponding to

power level 9.

2 From power level 9, press the sensor

and the symbol Pwill be displayed

on the indicator.

The Power function lasts for a maximum of

10 minutes. After this time, the power level

will automatically set to level 9.

POWER FUNCTION DISCONNECTION

The Power function can be disconnected

by pressing the sensor associated with

the hotplate in question.

The function can also be disconnected

automatically if the temperature in the coo-

king area is very high.

Bear in mind that the 3 and 4 model of pla-

tes have 2 independent power generators

of 3,200 W each, which respectively con-

trol the plates on the left and on the right.

For this reason, the Power function cannot

be activated at the same time in two plates

on the same side. In other words, if this

function operates in a plate on the left, the

Power cannot be activated on the other

plate on the other side, but it can be acti-

vated on the other plate on the other side.

Once this function has been activated in a

hotplate, the one on the same side will

have its power limited to the remaining

power up to a total of 3,200 Watts. If the

power level on this plate is too high, the

touch control will automatically reduce it to

the maximum allowed (7).

Fondue function (except

models ...632 and ...612)

This function is especially designed for

melting butter, cheese, chocolate, etc. It is

a lower power level than level 1.

To access this function:

1Activate the plate you wish to use at

power level 1.

2Press the sensor (4) and the indica-

tor will show the symbol .

To deactivate the function, simply touch

the sensors (4) or (5) and the indi-

cator will display, respectively, a lower

power level 0 or higher 1.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Teka IT 612 in the language / languages: English, German, French as an attachment in your email.

The manual is 0.86 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Teka IT 612 Manual

Product: