781071
4
Zoom out
Zoom in
Previous page
1/25
Next page
4
Notes about the cookware to be used with
your induction hob.
The size of the base of the cookware to be used
should be large enough to completely cover the
cooking zone drawn on the glass.
Depending on the type of cookware (material
and size), the induction zones may work with
smaller cookware.
Please remember that in order to work, the
induction elements need to be used with cook-
ware that has a ferromagnetic base (material
attracted by a magnet).
Always use cookware with a flat, smo-
oth base on the induction elements. Using
cookware with a deformed, concave or cur-
ved base can lead to overheating that can
damage the glass or the cookware.
Please take into account that the
cookware that you use can greatly affect the
how well the induction element works. You
may find cookware on the market that,
although marked as being suitable for induc-
tion hobs, does not work very well or is not
easily recognised by the induction element
due to the little amount or poor quality of the
ferromagnetic material that the cookware
has in its base.
Hinweise zum Kochgeschirr
Der Boden des verwendeten Kochgeschirrs
sollte die gesamte Fläche der auf der
Glaskeramik gekennzeichneten Kochzone
bedecken.
Dennoch kann ebenso Kochgeschirr kleineren
Durchmessers verwendet werden, sofern
Material und Größe des Geschirrs eine
Magnetisierung erlauben.
Die Induktionszonen sind ausschließlich für
Kochgeschirr mit ferromagnetischem Boden
geeignet (magnetisierbares Material).
Der Boden des Kochgeschirrs sollte
glatt und vollkommen eben sein. Andernfalls
nnen Geschirr und Glaskeramik durch
Überhitzung beschädigt werden.
Die Leistung der
Induktionskochzonen hängt wesentlich von
der Art des verwendeten Kochgeschirrs ab.
Kochgeschirr für Induktionskochzonen wird
vom Hersteller entsprechend gekennzeich-
net, jedoch ist dies keine Garantie dafür,
dass das Geschirr vom Kochfeld erkannt
wird oder dass die Leistung der Kochzonen
effektiv ausgenutzt werden kann.
Ausschlaggebend sind hier in jedem Fall
Qualit und Menge des im Boden des
Geschirrs verarbeiteten ferromagnetischen
Materials.
Notes sur les récipients à utiliser sur votre
plan de travail à induction.
Le récipient à employer doit avoir un fond dont
la dimension de fond couvre complètement la
zone de cuisson qui figure sur la vitre.
Selon le type de récipient (matériel et dimen-
sion), les zones à induction peuvent fonctionner
avec des récipients plus petits.
Il convient de tenir compte que les plaques à
induction nécessitent pour fonctionner des réci-
pients à fond ferromagnétique (matériau attiré
par un aimant).
Sur les plaques à induction, utilisez
toujours des récipients à fond plat et lisse.
L'emploi de récipients à fond déformé, con-
cave ou ondu provoque des surchauffes
qui peuvent endommager la vitre ou le pro-
pre récipient.
Il convient de tenir compte que le réci-
pient que vous utilisez peut avoir une gran-
de influence sur le rendement de toute pla-
que à induction. Il existe sur le marché des
récipients qui, malg le fait d'être signalé
comme aptes pour l'induction, ont un rende-
ment très faible ou des problèmes pour être
reconnus par la plaque à induction, en rai-
son de la légère quantité ou qualité du maté-
riel ferromagnétique qu'a le fond du réci-
pient.
GB
DE
FR
Introduction / Allgemeines / Présentation
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Teka IRC 631 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Teka IRC 631 in the language / languages: English, German, French as an attachment in your email.

The manual is 0.86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info