781075
24
Zoom out
Zoom in
Previous page
1/25
Next page
GB
24
Excess temperature in the
electronics or on the glass. Wait some time to allow the
electronics to cool down or
remove the container to
allow the glass to cool.
A plate powers off and message C is displayed on the indicators
The induction zones are not heating up
The pan is unsuitable (it
does not have a ferromag-
netic base or it is too
small).
Check that the pan base
reacts to a magnet, or use a
larger pan.
When you start using the induction zones, you hear a buzzing sound
The pan is light or made
up of more than one part.
The buzzing comes from
energy being transmitted
directly to the base of the
pan.
This buzzing is not a fault. If,
however, you wish to avoid it,
lower the power level slightly
or use a pan that has a hea-
vier base, and/or that is made
of a single part
The touch control does not come on
The lock is enabled Disable the lock.
When frying or making a stew, the energy in the induction zones seems
to decrease (“the hotplate gets less hot”)
If the temperature of the
glass or of the electrics
gets too high while coo-
king, a self-protection
system is triggered that
adjusts the power of the
hotplates so that the tem-
perature does not get any
higher.
Overheating problems while
cooking only occur under
conditions of extreme use
(cooking for a long time at full
power) or when the hob has
been wrongly installed.
Check that the hob has been
installed as described in the
instruction manual.
The sound of a fan can be heard while cooking, and it continues when
the cooker has been turned off.
There is a fan in the
induction zones to cool
the electronics.
The fan only comes on when
the electronics heat up -
when the temperature goes
down it goes off automati-
cally, whether or not the hob
is on.
If something doesn’t work
Before calling the Technical Service, please
make the following checks:
Fault Possible cause Possible solution
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Teka IR 632 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Teka IR 632 in the language / languages: English, German, French as an attachment in your email.

The manual is 0.86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info